EASYJOINT Paving COMP Black 12.5K

Product Information

Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints EASYJoint is perfect for patios, paving and paths that only have pedestrian foot traffic, however will not withstand the weight of a car or larger van. We do not recommend EASYJoint for use on driveways due to the types of sub-base and bedding mortar needed. Should I seal my paving slabs before using EASYJoint brush-in patio grout? Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair.

Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? Whilst this is the preferred method of application it should not be used when ground temperatures are at or below zero. A single 12.5Kg Tub of EASYJoint will cover approximately the following areas of paving* Paving Size (mm) Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America.EASYJoint works 10-20 times faster than conventional mortar and it can be installed in rain or dry sunshine. When used with water, it offers a mark free paving solution and a solid join that will last for years to come. EASYJoint, as the name implies, prides itself on being a product that is easy to use. If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money.

Both the EASYJoint and Joint-IT products have their own benefits. If you are unsure of the right paving accessories for your needs, call our team. We have a friendly team of paving specialists that will help ensure you create the right paving for your needs. Sponge Machines & Ancillaries We supply a range of indoor & outdoor sponge machines from Refina & Berta which are suitable for cleaning epoxy & cement grouts such as UltraScape Flowpoint from quarry tiles, external paving slabs, natural stone and granite setts. Our range of sponge machines protects the joints between paving slabs by avoiding washing away the cement, whilst the machine removes the need for individuals to wash away grout on their hands and knees. Are you looking for a sweep-in jointing compound or patio grout but not sure of the best product for you? In this blog post we look at both EasyJoint and Joint-IT colours. These are two of the highest selling jointing compounds on the market. In this blog we compare both products so you can see which one is the best product for your needs. What are Jointing Compounds?Storage: It is always preferable to store in a cool dry place, however, the material is not damaged by frost or exposure to cold/wet conditions. Do not use a pressure washer on the paving for at least 4 weeks after EASY Joint’s application. Always use a fan type nozzle at a 45 degree angle and no closer than 15 cms / 6 inches to avoid removing the jointing material from between your slabs. Is EASYJoint suitable for patios and driveways? Freezing conditions are not always problematic for EASYJoint, however the volume of water used during the application process can potentially freeze. In this instance the particles within the grout mix won’t settle into the joints evenly due to the presence of ice and potentially lead to longer term problems. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time – better than traditional jointing EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.