Thermaltake The Tower 100 Mini PC Chassis

Product Information

Likewise, pay attention to the maximum length, width, and (potentially) vertical height (full-height versus half-height) that the case allows for video cards. Depending on the card you have, or plan to get, that sizing may be a deal-maker or deal-breaker. Some of the smallest cases don't support a video card at all, and if you intend to rely on your CPU's integrated graphics, this can be a real space saver. (Know, though, that some chips, including many of AMD's mainstream Ryzen CPUs, do not have an integrated graphics processor, and that your motherboard will need to have an appropriate video output.) For one: The case doesn’t have any LED illumination built in, nor does it ship with RGB or aRGB LED fans. (The two included spinners are, curiously, unlit.) The case will do a good job showing off the parts you install into it, but as you can seee here, our finished build looks rather dull without some LED flair. The motherboard gets mounted vertically in this case, positioned so that the board is on full view through the front glass panel. With all of the glass panels removed, getting access to all of the various headers to get them connected up is made fairly easy; you have easy access from three directions. The same goes for the RAM slots on your board, and the PCI Express slot for your graphics card. At first, you could easily mistake one of these cases for a larger MicroATX chassis. These are in fact smaller, however, and can’t hold a MicroATX board. This design isn’t as space-saving as most others, but it also means more room inside for hardware. The building process may be easier, too, given the extra interior. Phanteks Eclipse P200A DRGB

A system built into Thermaltake’s The Tower 100 case has potential to be a real eye-catcher. The Tower 100, however, leaves a lot of that work to you. The price is attractive enough, but Thermaltake doesn't give you a whole lot outside the glass (aesthetically speaking, and in terms of accessories in the box) to make it an attractive option for someone looking to build a flashy PC case. It's something of a blank-slate box.The second should be the number and kind of drives you intend to install. Most Mini-ITX cases support at least two 2.5- or 3.5-inch SATA drives, but factor in room for what you have. This won't matter if you go all-in on motherboard-mounted M.2 drives, but cramped Mini-ITX boards have room for just one or two of those. Now, what if you were to lay your pillar down? This third style uses a design that more closely matches a long, thin box. SilverStone Sugo 14: Shoebox dimensions Beside the motherboard mounting tray and the PSU compartment, Thermaltake left a large space for the video card. The cavity can accommodate a dual-slot card up to 330mm long. At this point, the wide range of differences that can exist among a pool of Mini-ITX cases may seem daunting. You are probably starting to wonder how this can even be a single form factor at all. A form factor implies that it should be standardized, but in the case of Mini-ITX PC chassis, it’s mostly the motherboard size and shape that keeps this family a family.

You may also see support in a given case for a variant of the SFX form factor, the SFX-L. This is an offshoot, a slightly larger version of an SFX power supply with a longer body. (An ordinary SFX PSU measures 3.9 inches long, versus 5.5 inches for SFX-L.) The extra body size on an SFX-L supply allows for more and larger components and cooling hardware inside, in turn allowing for higher wattages. Don’t assume, however, that you can cram an SFX-L power supply into a case that only supports SFX PSUs. Look for that specific support. Even with added LEDs, some more conventional PC cases could make better display cases for computer hardware than this one. The thing is, though: Most of those are ATX, and this is Mini-ITX.

The Tower 100 is a vertically designed case constructed with solid steel all around, the vertical design allows the chassis to have a smaller footprint, and helps to minimize obstruction to your gaming and workspace area. The vertical design also helps extract heat from the chassis by using a chimney effect, taking cold air from the base and dispelling the heat via the top. Examples: Fractal Design Era ITX , Phanteks Eclipse P200A DRGB Style 5: The Cube (or Near-Cube) Style A whole host of other variables also limit what you can and can’t put inside a Mini-ITX system. Some of them have nothing to do with the Mini-ITX case itself. The Tower 100 Mini Chassis is the newest member of The Thermaltake Tower Series. It features three 4mm tempered glass windows for a stunning view and two preinstalled 120mm standard fans on top and at the rear for exhaust. It is a much smaller version of The Tower 900 with dimensions of 462.8mm (Height), 266mm (Width), 266mm (Depth). Though it may not be the smallest Mini-ITX chassis on the market, it is a highly capable one that can fit high-end components like the RTX 30 Series Graphics Cards. The Tower 100 Mini Chassis is designed to target users who have a limited space at their workplace or at home, or those who simply do not want their PC to take too much space. No matter if you are a regular users, gamers, or content creators, etc. you will find it ideal and can place it almost anywhere in your room. The biggest one is whether you will (or will ever) install a video card. The absolute smallest Mini-ITX cases support no video card and assume your CPU’s integrated graphics will handle video output and acceleration. That factor will eliminate (or recommend) a whole swath of cases. Otherwise, look to the maximum video card length supported, as well as the number of lateral slots the card can occupy, and shop accordingly. Nvidia's newest top-end RTX 40 Series cards are huge and some occupy three slots across; Mini-ITX cases are generally not their friend.

Two 3.0 USB and one USB 3.1 (Gen 2) Type C ports are placed on the top panel to grant direct access when needed. How could it be corrected in a future revision? A vertical motherboard mount like this necessitates the I/O positioning up top, to be sure, but some extender cables to the most commonly used ports (such as to a subset of your USB ports or to the display output) would be very thoughtful accessories to include. Or perhaps some L-adapters for stiff cables like HDMI or DisplayPort. These cases tend to be among the most compact, with some designed to support a monitor sitting on top. They also tend to be easier than most to build in, as opening one large side of the enclosure grants easy access to all of the internal hardware. Examples: Corsair 2000D RGB Airflow , Phanteks Evolv Shift X , SilverStone Lucid LD03 , Hyte Revolt 3 Style 3: The Shoebox StyleToday's PCs come in enough shapes to dazzle a dodecahedron, but in the realm of desktops, three main classes of aftermarket PC case reign supreme: full ATX, MicroATX, and Mini-ITX. These three case “form factors” make up the bulk of the market for modern desktop chassis, and you can simply think of them as big (ATX), medium-size (MicroATX), and small (Mini-ITX). Each of the form factors has its own strengths and weaknesses; in this guide, we’re going to go compact and focus on the Mini-ITX ones. In short, that means a Mini-ITX case can be just about anything—and they are. We’ve jokingly called Mini-ITX the least-standardized standard in PC building. That’s because these cases come in myriad designs on the outside, and you never quite know what to expect until you start to work on one on the inside. Routing cables down and around behind the motherboard was super easy, barely an inconvenience™, with plenty of space to the sides and passthrough holes which kept wiring out of the air exhaust path. Mini-ITX motherboards measure 6.7 by 6.7 inches, with mounting holes in prescribed locations; Mini-ITX cases, then, are built around accommodating these board dimensions. That said, some Mini-ITX cases are much bigger than others in terms of height or volume. But by definition, a “true” Mini-ITX case won’t accommodate any board bigger than a Mini-ITX one, with the exception of a few that also support the slightly larger (and uncommon) Mini-DTX form factor. Mini-DTX boards are slightly taller than Mini-ITX boards, at 8 by 6.7 inches. (The next biggest size class for motherboards, MicroATX, is 9.6 inches square and defines the next-largest class of PC cases.)

People may have concern about the cooling performance of a mini-ITX chassis. However, the cold air intakes and hot air exhausts are well-developled, ensuring the interior temperature stays low at all times. This second style of Mini-ITX case stands out for having the smallest footprints; most of the gear inside is mounted vertically. Pillar cases are designed to stand up straight, obelisk-style, and not lie down. The internal layout changes considerably, and in some of these, you can fit a full-height graphics card on end. Corsair 2000D RGB Airflow

The Building Experience

Another option might be to make the chassis a little taller, allowing for more room to access the I/O panel from the rear. Having the rear I/O panel on the top of the PC case is unconventional, but doing this would make getting to the rear I/O panel far easier without significantly changing the design. After the top panels have both been removed, you can remove all three glass panels by simply sliding them up and pulling them off of the case. It’s only after removing these panels that you’ll be able to start building a system. The downside? They also have the most hardware restrictions. Most mandate low-profile coolers, half-height add-on cards (if any cards at all), and SFX (or even smaller proprietary) power supplies. This makes them a poor fit for gamers but an excellent choice for a moderate or light-duty work PC (or an HTPC) that relies on processor-integrated graphics.