Hive Thermostat Wall Backplate Battery Cover for v2/v3

Product Information

On the twin channel one that he posted up 1 and 2 are hot water and heating off connections, 3 and 4 are the hot water and heating on connections, there isn't any volt free contacts. You’ll also get an extra 10% off Hive products and home repairs, plus extended warranty on your Hive heating devices.

Unfortunately our engineers can't install a Hive Thermostat on solid fuel boilers (such as biomass systems or coal) and heat pumps. It keeps an eye on how you’re heating your home and provides personal suggestions to help improve efficiency and achieve your savings target. I have been advised to go to Tool Station or Screwfix to get a compatible backplate, ie REPLACING the whole backplate (which has the wiring terminals and connections for the 'front' control unit). Yes, preferably at the other end to the thermostat so that there are no redundant live wires floating around. However, if you have existing intelligent oil boiler heating controls that modulate your heating, a Hive thermostat will not replace this functionality.It plugs into your broadband router and connects all of your Hive devices wirelessly so they can be easily controlled remotely. You can also use the thermostat stand (available separately) to position it on a table or shelf within your home. It’s part of the existing central heating system and isn’t compatible with other external heating controls.

Not true, its only single core green/yellows that can't be used as a live connector, and earth in a multicore flex is fine to use for something else as long as its flagged up the appropriate colour.This amount includes seller specified domestic postage charges as well as applicable international postage, dispatch, and other fees. Fitting was easy enough, plug the bridge into the router, set it up via the app, remove the esi thermostat and backplate (revealing a standard back box in the wall) and wire up the tado backplate. You’ll need to be competent in electrical wiring and DIY to install a Hive Thermostat Mini yourself. You can’t control your water temperature with the thermostat but you can turn your hot water on or off, set a schedule or boost it (which turns the hot water on from 5 minutes up to 6 hours).

If your boiler works with a standard room thermostat and / or programmer then a Hive Thermostat can control it. However, you won’t be able to control your heating via the app until the internet comes back online. It appears that the control circuit of the boiler is extra low voltage, maybe 24V and must not be connected tot he mains supply.You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.