Rolson 44320 Light Duty Staple Gun

Product Information

The pressure the spring exerts is strong enough to enable the staple to penetrate even hard materials. If the nut is stuck in place or won’t move when you try to turn it, use the appropriate-sized wrench to loosen it. Remember always to carefully handle your tools and follow the manufacturer's instructions for optimal safety and performance. If your stapler doesn’t have an indication for how to load brad nails, it’s possible that the stapler isn’t able to fire them. If you're going to be using a lot of staples for the project, it's a good idea to fill up the chamber with staples, leaving only about 1⁄ 4 in (0.

Staple guns are essential tools for homeowners, but they can encounter common problems that hinder their performance. Adjust the depth setting on your staple gun to ensure it's set correctly for the material you're working with. The release button should be on the opposite side of the bottom of the gun where the staples are fired.By adjusting the knob, you can increase or decrease the power of the staple gun to suit the task at hand. Pull the plug out of the wall, and find the trigger lock just behind the trigger that you would use to release a staple. To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.

Electric Staple Guns: These are powered by electricity through a cord plugged into an outlet or a rechargeable battery. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. Squeeze the lever at the front of the gun, and pull the rod away from the stapler to remove the magazine. Take a row of staples and position them so that the legs are facing down with the staples on top of the rails inside of the chamber.

Then, load the staples legs-down over the guide rails, replace the pusher until it locks in place, and do a test staple on scrap paper. Consider a model with an adjustable power control feature, allowing you to control the force of the staple being fired, which can be critical for different materials.