SCYTHE SCFM-2000 FUMA 2, CPU cooler - 2x120 mm

Product Information

So, even though the Fuma 2 did not cool as well as it could have, that extra four degrees in the tank hurt them a bit, but all around, we have very little reason not to recommend you buy this cooler, no matter what the motherboard is, no matter your memory arrangement, the Fuma 2 is here ready and willing for you to give it a chance! Ive owned Noctua in the past, on this PC prior to the MSI excursion (im not wasting my time on water gadgets ever again) but decided to give this a go on recommendation, its the easily equal of Noctua

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. The first tests were done with a TDP enforced at a 100w limit, because most consumers considering this cooler will likely be using a mid-range CPU like the Ryzen 5 3600x. Both coolers performed on par with each other – with the FUMA 2 winning some tests by a small margin, and the NH-U12S winning other tests by a small margin. The mounting kit offers very high compatibility for AMD and Intel processors. In addition, with its sturdy screw connection, it guarantees a secure fit of the cooler even during transport. Thermal paste and installation instructions are also included.

Both of the Kaze Flex 120 II fans use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberised pads covering the frame have a decoupling effect and prevent the transmission of noise and vibrations to the case. H.P.M.S. IV (Hyper Precision Mounting System IV) So ya probably wondering what that asterisk on this review's headline is for. Simple: I am NOT a computer expert. I am not constantly finding the ins and outs of how to build the next super computer for our future robot overlords. I'm just a gamer/video editor who Google'd "How to build a PC on a budget" one day and eventually came here. If you're looking for the right cooler for your PC build, take what I say with a grain of salt and do your own research like I did. That being said, I bought this fan half a year ago on a budget and wanted to test it out before I wrote this review. My PC specs are as followed: Estoy encantado de decir que este ventilador está funcionando a la perfección. Mantiene mi CPU a una temperatura óptima incluso durante las tareas más exigentes. No más preocupaciones por el sobrecalentamiento.

Fan 1: 120 mm Kaze Flex PWM (2.7 - 23.9 dB (A), 300 - 1,200 rpm, 14.06 - 57.52 m³ / h) (8.27 - 33.85 CFM), 0.23 - 0.9 mmH2O Intel LGA2066, LGA775, LGA115x, LGA1366, LGA2011 / 2011-v3 - AMD AM4, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ * There is no doubt that we kept bringing up the SE-207-XT Advanced, and that is because, currently, it is the class leader. However, that does not mean that is the end of the discussion. The 207 does not make concessions for anything, really. It is a large dual-tower design with loud fans, and while performance is king, we hope you are cool using low-profile RAM because ID-Cooling felt it wasn't that big of a deal. This is where a cooler like the FUMA 2 Rev.B stands out. It can run close to the competition but also makes concessions to RAM clearance and eases off the noise emitted into your ears. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. Prior to testing at each TDP level, I would run AIDA64 CPU & FPU Stability test for one hour to soak the room with the heat generated from the CPU to ensure consistency in results. Acoustics

There’s more to a cooler than just it’s heat sink. The fans included have a huge impact on cooling performance and noise levels. Included with the FUMA 2 are the Kaze Flex 120 PWM and the Kaze Flex 120 Slim PWM fans. Fan 1 Fan 2: 120 mm Kaze Flex PWM (4.0 - 24.9 dB (A), 300 - 1200 rpm, 28.2 - 86.93 m³ / h) (16.59 - 51.16 CFM) , 0.076 - 1.05 mmH2O Asymmetrical design allows unrestricted use of any front RAM slot, and cut-out fin design gives clearance(55mm) of rear RAM slot(LGA2011/2066). Standing only 155mm tall, the cooler fits most PC case on the market. Decidí darle una oportunidad al ventilador de CPU SCYTHE FUMA 2 SCFM-2000, ya que mi procesador Ryzen 7 5800H tiende a generar mucho calor y necesitaba una solución eficaz.