Joined in 2023 
82 
63 About this deal
If you don’t get the frame level on the first try, you can adjust where each side of the Velcro meets to get it perfectly level later. Maybe your landlord doesn’t want to forbid you to screw holes into the wall, but it just doesn’t work? My advice — if you’re hanging something really expensive or invaluable, use a nail or double up on Command strips. Alternatives to Command Strips I totally understand how frustrating and upsetting it could be to have a pricey piece of art or sentimental photo come crashing to the floor. Additionally, as you’ll see in the next section, Command strips could detach from the wall and ruin your frame, art, or photo. If you follow the instructions, the chances of this happening are slim, but it certainly does happen.
Step 4: Remove the protective liners that are now facing away from the frame and position your frame where you want it on the wall. So you could theoretically also work with weights here, but you must be aware that it is about many kilograms. I once weighted down an IKEA CD shelf (the high one) with leftover 1-cent and 2-cent pieces. It was about 8kg and it was still way too wobbly.
It could also be that the insulating material in the wall is potentially carcinogenic and you should not spread it in the apartment? So one idea would be to cast a weight out of screed, concrete or something similar and screw it to the bottom shelf from below.
On the flip side, if you use Command strips, you won’t have to pay for wall putty and paint when you eventually have to patch up holes. How to Use Command Picture Hanging Strips The most common use for these picture hanging strips is, you guessed it, to hang heavy (or light) framed pictures to your walls and other surfaces without damaging them with nails and anchors. The last downside is that you can only use Command strips once. Command designs their pull-tab release mechanism to ensure there is zero wall damage. When you pull the strip to take it off the wall, it stretches out and becomes unusable. Unfortunately, you can’t use them more than once, but paying a little extra for more strips beats the time it takes to patch holes. What Are the Most Common Complaints? Other methods like glue actually leave more damage on the wall and is harder to clean up when you want to move out. They come in 3 different sizes (small, medium, and large), and each size has its own weight limits.This period allows the adhesive to fully adhere to the wall before adding the weight and resistance of the frame. However, when that moment finally comes when you have to take down a picture, buying wall putty, sanding, painting, and being left with a less than perfect wall is a much higher price than the cost of these strips. Putting the strips in the wrong spots on the frame. Follow these placement instructions that I covered earlier. The Small Picture Hanging Strips can hold up to 1 pound per pair. The Mediums hold 3 pounds per pair, and the Larges hold 4 pounds per pair.
All said, especially if you have kids, I would highly recommend screwing in the IKEA wall anchor kits — from the BILLY bookcases to the wall with hardware suitable for your wall. Patch up the holes when you move. This video does a great job summarizing the process of hanging pictures that I just described. Common Mistakes When Using Command Strips In addition to picture hanging strips, they manufacture clips for outdoor lights, hooks for hanging things on glasswindows and doors, caddies for wall storage, and much more. I was recently introduced to 3M Command strips and after a trial I am a fan! It has always seemed to me rather primitive in this technological age to still “bang a nail in the wall” to hang a picture. So far I have re-hung about 10 pictures – mostly light, the heaviest is 2kgs – and they seem pretty firmly fixed to the wall (I keep testing them to make sure). The rear of the picture is generally a smooth surface, often hardboard and my internal walls are emulsioned and smooth (the house is in UK and only 22 years old). The house doesn’t suffer any extremes of heat/cold & humidity. I have been applying the strips to the picture and leaving them overnight to “prove”. Like Andrew, I do not remove the picture when first hung (as specified in the 3M instructions) but hold it firmly in place with moderate pressure and count slowly to 60. So far so good. What I really wanted to find out is what is the longest period anyone has had a picture on the wall for? Correspondents are very keen to tell their stories of failure and then call the product garbage but I would also hate to find out that the pictures all fall off the wall in 2 years time! ReplyIn all honesty, I’ve never followed this step and never had an issue. From my experience, as long as your wall is clean and you press the frame against the wall and hold firmly for 30 seconds, you should be all set. Press the frame firmly against the wall for at least 30 seconds. Put pressure on the areas where the strips are so they adhere securely to the wall. This will only occur if you exceed the weight limits and don’t use enough strips, or you don’t allow enough time for them to adhere to the wall before adding the weight of the picture. Pulling the frame off the wall the wrong way. If you pull the frame straight off the wall, you risk damaging it. If you’re using three pairs, place onehorizontally in the center of the top frame and two on the top of the sides.
Great Deal 
New Comment