Joined in 2023 
82 
63 About this deal
The Cisco GLC-BX40-D-I, GLC-BX40-DA-I, and GLC-BX40-U-I SFPs operate on a single strand of standard SMF.
Ethernet-to-Fiber Media Converters - Industrial - Moxa Ethernet-to-Fiber Media Converters - Industrial - Moxa
StarTech.com OAM Managed Gigabit Ethernet Fiber Media Converter - Multi Mode LC 550m - 802.3ah CompliantEyeglasses and Wristwatches - Wearable devices are making huge waves in the technology world, and many of them have yet to even be released! Regardless, they are already expected to become major parts of everyday life, and that means more transceivers moving through the world.
Ethernet Media Converters, Ethernet to Fiber Media | RS Ethernet Media Converters, Ethernet to Fiber Media | RS
When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port. The GLC-GE-DR-LX SFP can interoperate with other 1G SFPs/interfaces as long as those are based on 1000BASE-LX/LH standard. No attenuator is needed in any fiber strand. Choose a high-quality fiber to fiber media converter from Omnitron Systemsto ensure network uptime and long-term reliability. The GLC-BX-D and GLC-BX-U SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate” Much like other aspects of network connectivity, there are options regarding what kind of connection is desired. There are some instances where it makes the most sense to use a wired, analog connection. In these situations, distance or mobility are probably not as big of factors as they could be elsewhere, and the importance of uninterrupted service is critical. But as Wi-Fi connectivity becomes less of an extra perk and more of an expected amenity, providers are seeking out new ways in which to bolster the range of their coverage. Wireless transceivers are going to be absolutely critical in expanding quality access to the Internet. In this mode, the media converter will auto negotiate copper link parameters. When switch is down, the media converter will be in manual mode and will use the parameters as define by Copper Duplex and Copper Speed switches In this mode, the copper port will be fixed at 100 Mbps. When switch down, the copper port will be fixed at 10 Mbps. Note: Copper Negotiation switch must be set to manual for Copper Speed switch to work.
TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to
The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards. The GLC-BX-D-I and GLC-BX-U-I are the Industrial temperature rated (IND) counterparts of GLC-BX-D and GLC-BX-U SFPS. This allows link operation in harsh environmental conditions where the module case temperature can be in the range -40°C to 85°C.
S-10GRT-SFP Media Converter Features
To provide you with a better idea of how transceivers are being applied today, here is a list of some of the machines they help empower: When shorter distances of Single-Mode Fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB. With Fiber Fault Alert the state of the 10 Gigabit Ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G Ethernet interface of the media converter. A strain relief strap is provided to ensure a solid and secure power connection to the media converter. Ideal for areas that may be exposed to any vibration.
PoE+ Fiber to Ethernet Media Converter - Fiber Media
The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment *. For more details, refer to the document SFP Compatibility Matrix at: https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. The GLC-BX80-D-I and GLC-BX80-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. The empty transceiver port on the S-10GRT-SFP Media Converter allows for flexible network configurations to meet any requirement using a variety of transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. You can use this products to convert:
Analytics
Fiber-to-fiber media converters are compact devices that provide seamless integration of different fiber types by converting multimode fiber to single-mode fiber, and dual fiber to single-fiber. Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power, and can support the “Three Rs” to Retime, Regenerate and Reshape the optical signal. The Perle S-10GRT-SFP Media Converter transparently connects 10/100/1000/2.5G/10GBase-T Ethernet links over multimode or single mode fiber. Each Media Converter comes with one RJ45 Ethernet 10GBase-T port and an empty slot for one SFP or SFP+ module. Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, 10/100/1000 SC, International Power Supply, 1310 nm, 2,000 m
Great Deal 
New Comment