Homax 6100 Ceiling Texture Scraper,Black,12-Inch

Product Information

If you are concerned about asbestos in your home then you would need to seek professional advice from an asbestos surveyor to determine whether the asbestos is present. You can also send a sample of your artex off for analysis. Don’t be tempted to sand down the artex first as this can release asbestos particles and realise fibres that can become airborne and any inhalation can be damaging. Sources You can also use a mud pan, specifically the kind for holding joint compound, to catch the wet popcorn so it doesn’t all land on the plastic-covered floor. It does create a slippery mess. The name Artex comes from the trademark Artex LTD, who are based here in the United Kingdom. This substance is often used by decorators, usually skilled plasters as they create these individual patterns on ceilings and walls. However if your artex looks undamaged, you can use the X-Tex product to remove the artex as this product will provide you with safe removal. The reason for this is because the product is a wet gel and doesn’t cause dust on removal.

If you would like to know how to remove Artex from ceiling, the process is exactly the same, just follow the 5 simple to follow steps above. Tools to Remove Artex You will also be using a scraper, which has a sharp tip, so it’s strongly advised you protect your hands using protective work gloves. There is a difference between artex and plastering and that's due to the finished product, as plastered finish is smooth and the Artex is textured. We recommend that you cover yourself appropriately, wear old clothing and ideally cover your skin, with long sleeves and trousers. The X-Tex is a safe product to use. This doesn’t cause any burns and you won’t get any nasty toxic smells due to the products PH level.As the surface is textured rather than smooth, be prepared to use two coats of paints to ensure the surface is covered fully. Q: How much does it cost to remove artex that contains asbestos? Artex is a type of surface coating often found on ceilings and walls. Artex creates types of textures, usually swirls or stipples. This method of decoration was widely popular in the UK between 1970’s - 1990’s and can be recognised in homes today. Even though the X-Tex product is safe to use and ensures that no dust will escape during the usage, we would still advise you to protect yourself and use a dust mask whilst removing the artex.

A: In short, yes you can! If the artex in your home is in good condition and there are no breakages then it is safe to cover the artex with plasterboard and skim over it with a fresh layer of plaster. Even if the artex in your home does not contain asbestos, the removal of this if sanded and scrapped can still cause dust, therefore it’s important to protect yourself fully before jumping in feet first.As we have discussed the tools and safety equipment, it’s now time to look at the materials you will need to safely remove Artex from your walls or ceiling. It is strongly advised you don’t break off any of the artex to send as a sample yourself, as you could risk exposure to harmful fibres. Safety is key whilst removing this material, we will discuss safety shortly. This coating is not harmful if left untouched, as Artex is usually located on the ceilings it poses no risk whilst left undisturbed.

Artex was originally created with small amounts of asbestos, the reasoning behind this was it would strengthen the product. This process of mixing was used up until the mid 80’s. A: You can paint over artex, as the surface is textured you need a special type of tool and paint to do the job properly. However it can be harmful when drilled, cut broken or sanded into a powder form as the dust particles created by sanding can be extremely hazardous if inhaled. Next, you’re going to want to wet the ceiling with a pump sprayer. This will make for easier scraping and much less dust during the removal process. If you already have a garden pump sprayer, that’s the perfect tool to mist the ceiling gently. Just be sure to let it soak for about 15 minutes before scraping. Note: If your home was built before 1979, the texture might contain asbestos, which can do serious damage to your lungs. So before removing texture, it must be tested (you’ll find lots of labs and instructions online). You can remove texture that contains asbestos yourself as long as you carefully follow safe procedures. For all of these reasons—mess, time, skill level, asbestos—covering a ceiling is often easier than removing texture. Another option to consider is covering your popcorn ceiling with drywall instead of removing it. Here’s how.Apply an X-Tex coating onto your artex surface. Use a paintbrush and generously apply a coat to the surface. Step 3 If your home was constructed between 1985-1999 then your home is less likely to contain asbestos in the artex. If your home was built after 1999 then the Artex in your home will not contain any asbestos. Artex was once a highly popular decorating choice method for ceilings. Due to changes in interior fashion, it is now becoming less popular among homeowners with most choosing removal options. Use a metal spatula or long-handled blade scraper to begin scraping off the layer of artex. This process is similar to removing wallpaper. The pieces will fall directly on the floor. Step 5