AISIRER Alexa Smart Bulb WiFi Light Bulbs B22 Bayonet, 2 Pack, 10W 1000LM, App or Voice Control, 90W Dimmable White and RGBCW Colour Changing Light Bulb, Works with Alexa, Google Home, No Hub Required

Product Information

Remote And Group Control】Keep this smart light bulb connected with your home 2.4Ghz Wifi network (5Ghz not current supported). You can control this smart light bulb remotely on your smartphone to make it appear as though there are people in the house when you leave home via schedules and timers. Group control functions allows you to control more than one smart light bulb at the same time with the same commands. If your router is overloaded or has too many devices connected to it, try reducing the number of devices connected to your router. Alternatively, use a different channel or frequency band for your bulb. Make sure your phone and your bulb are connected to the same 2.4GHz Wi-Fi network. Also, ensure that the network signal is strong and stable. So, try these troubleshooting tips if you are having a hard time getting your Aisirer Smart Bulb Won’t Connect to Wi-Fi: 1. Ensure the Bulb is in Pairing Mode

smart bulb - the easy guide for every brand How to reset a smart bulb - the easy guide for every brand

There you have it, we hope one of the troubleshooting tips above helps you in fixing the problem. Try out all the guidelines above to see which one works for you. If the connection works properly but your device can’t find the network, you may need to upgrade your router or add an extender to increase its range and connectivity. Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed? Dimmable Bright Light & Energy Saving】The light brightness can be fixed percentages from 1% - 100% output, you can set many different scenarios like 'Reading Light' 'Soft Light' 'sleeping Light' etc. Our Smart light bulb using LED rather than incandescent bulbs. It is less energy, produces less heat, good for saving energy.Go to your router’s setting to disable the 5 GHz network bandwidth or ensure that you separate the two network bandwidths so you’ll know which network band you’re connecting to during setup. The Smart Bulb must be ready to pair before it can successfully connect to Wi-Fi. So, before the Wi-Fi connection setup, ensure the bulb is ready to pair.

Aisirer Smart Bulb Won’t Connect to Wi-Fi? (Solved)! Aisirer Smart Bulb Won’t Connect to Wi-Fi? (Solved)!

Usually, this removes all bugs, settings, and other problems you might not have noticed. To reset your Aisirer smart bulb; During the initial setup, make sure that your smart bulb and router are very close and there is no object obstructing them. Also, ensure that your mobile device is close by too as this helps the bulb connect to Wi-Fi faster without interference.

Be sure that you are using a 2.4 GHz Wi-Fi network when connecting the smart bulb to Wi-Fi. Also, ensure that your home network is on a detectable status. No, these lights do not overheat if they are left on for too long. These lights are made of high-quality materials and have a low power consumption of 9 watts. They also have a long lifespan of up to 30,000 hours and good heat dissipation performance. However, it is recommended that you turn off the lights when you are not using them to save energy and extend their life. Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed? Timing Control】 Never come home to a dark house - by using light schedules on the ‘Smart Life’ app and be greeted with warm white light. The timer function enables smart led light bulb power on and off automatically. Resetting a Philips Hue smart bulb is done via the official app. Assuming it shows up in there, go to the menu (the three dots in the top right-hand corner) and select “Light setup”. Press the “i” icon next to the bulb you want to reset, and tap “Delete”. If you have a Philips Hue Bridge, you can also perform a full factory reset on the hardware by flipping it over and pressing the clearly marked pin-hole button above the serial number. Just remember that this will cause your automated lighting hardware to forget every light on your system, and not just the bulb that’s acting up, so proceed with caution.

Bulbs WiFi Smart Bulb Bayonet, AISIRER 10W 900LM Alexa Light Bulbs WiFi Smart Bulb Bayonet, AISIRER 10W 900LM

The official instructions for resetting a Belkin WeMo smart bulb are a bit more detailed, but ultimately boil down to the same steps. Belkin suggests that you turn on the bulb, then switch it off for a second, before turning it on for 3-4 seconds, repeating the process three times. If the bulb is ready to pair, it will be flashing. However, if the light is not flashing to show that it is ready to pair or connect, your device won’t connect to Wi-Fi. The bulb may not be connected to the Wi-Fi network. Make sure that both your bulb and smartphone are connected to the same 2.4GHz Wi-Fi network with a strong and stable signal.

Turn the bulb off and wait for a few seconds now, turn the bulb on and off three times in a row, and wait for the bulb to blink. Verify that your router is compatible with your bulb. Your router should support 802.11b/g/n protocols and have a WPA/WPA2 encryption mode. If you are facing any issues with your Aisirer smart bulb not responding to your commands, it could be due to the following reasons: Millions of Colors】Express yourself and make your space more colorful with AISIRER Smart Light Bulbs. Choose from 16 million colors and soft white to instantly change the look and atmosphere of your room. Control with your smartphone remotely or voice commands and create customized scenes and really unleash your creativity. Perfect light for parties, reading, and all-around leisure activities.