TP-Link TL-SG2428P JetStream 28-Port Gigabit Smart Switch with 24-Port PoE+, 4 SFP Slots (250 Watt Budget, Centralized Cloud Management Omada SDN, and Intelligent Monitoring)

Product Information

Fixed the bug that the switch may fail in controller mode after upgrading the previous firmware version, which has been withdrawn. It is recommended to reboot the switch before upgrading, especially if the memory usage exceeds 60%. If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2210P v3.2, v5 and above, while is not supported by TL-SG2210P v4)

Worried about interrupted streaming when moving?Seamless Roaming of TP-Link solves this issue! Omada access points are equipped with802.11k and 802.11v fast roaming, switchingclients automatically to the access point with the optimal signal with a seamless transition when moving. Question is whether the noise is at an annoying level and that might differ for different people. For example, the usual noise floor (sound pressure level) in my office is ~35 to 39dB, that's a bit louder than a silent room. Noise comes from the machine room over the floor, if I close doors, it's gone, but some still comes through a big cable duct despite foam soundisolators in the duct. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. The TP-Link LiteWave Unmanaged Switches provide the simplest and most affordable way to expand your wired network. Just plug and play! Netgear 8-Port Multi-Gigabit/10g Ethernet Ultra60 PoE++ Smart Managed Pro Switch with 2 SFP+ Ports (MS510TXUP)

The TL-SG2428P switch is definitely not a core switch and is therefore not located in a deticated server room. It is a department switch or a switch for small sales offices. These have no separate rooms but only 19 inch cabinets in one corner of the room. The noise is just too loud for that... What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 84961 How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI 05-18-2023 21906 Feature Filter: All Configuration Guide User Application Requirement Further Assistance Troubleshooting When You Set Up FAQs

It doesn't bother me, because my hearing filters it out; also I don't hear as well as when I was young. But when my friend calls who is a professional piano tuner, he hears the fans from the machine room through the phone. Unbelievable.I sometimes don't even hear the phone ring, it's nearly as old as me and the ring speaker must have dissolved in 10,000 particlesmeanwhile. :-D What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above) 06-07-2023 61283 What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 15025 Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 15253 Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring.

let's compare the Switch USW-24-POE with the TL-SG2428P. The data sheet of the Unfi Switch says "The UniFi PoE Switch features fanless, silent thermal cooling, so it TL-SG2428P has two fans, yes. They make noise which would bother me if the switch would be deployedin my office (it's actually there, but I move it to the machine room soon). But if you use a PC with a standard fan (not a silent one) in your office, you probably would not be bothered by the switch's two fans in the same office. Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller TP-Link Omada Meshtechnology makes wireless deployment more flexible andconvenient.Omada EAPs with Mesh Technology, automatically choose the best route to extend your Wi-Fi further and more flexibly. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) **, Centralized Cloud Management, and Intelligent Monitoring.T: UTP category 3, 4, 5 cable (maximum 100m), 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m), 1000BASE-X: MMF, SMF StarTech.com 6 Port Unmanaged Industrial Gigabit Ethernet Switch w/ 4 PoE+ Ports and Voltage Regulation - DIN Rail / Wall-Mounta Support 802.1p CoS/DSCP priority, Support 8 priority queues, Queue scheduling: SP, WRR, SP+WRR, Port/Flow- based Rate Limiting, IPv6 QoS, Voice VLAN