Camisin MPPS V18 OBD2 Diagnostic Tool MAIN + TRICORE + MULTIBOOT V18.12.3.8 with Breakout Tricore Cable

Product Information

Excellent recovery functions. In some cases, MPPS can recover ECUs, while other tools cannot even communicate with it. This module can support advanced functions on Marelli ECU’s. MPPS ECU flasher covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others… Be sure the driver installation completes, then open the mpps software to use. Otherwise, mpps can not be used. MPPS V18 clone a powerful ecu programming tool for a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic, etc. and MPPS V18 software adds boot mode support for controllers with the tricore processor and adds support for advanced functions on Marelli ECU’s.Here are the supported list and info below, Boot and TC mode are both open and working.

MPPS SMPS V18 MAIN + TRICORE + MULTIBOOT with Breakout

From my knowledge from v12 they jump directly to v16 like they have done from v5 onwards than V8 - V10 - V12. Because of less focus from the tuning community on MPPS - the last "not genuine" version came on the market quite late (even Eu version). KESS V5.017 has no grey protocols .full protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10…. MPPS covers MAIN + TRICORE + MULTIBOOT and a wide range of controllers incl. M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others… details can be found in http://mpps-v18.blogspot.com/ But he wrote that only chinese only have v13 and there is no real one from AMT. But that's not correct.

have someone tried to write ecu ME7.9.10 Fiat Abarth Grande Punto 1.4T over obd with MPPS V12 or V16?? you cant expect to ask for help and get it straight away, it may take days/weeks until someone comes that knows the answer

News: MPPS V18 update to V21 won’t lock the machine News: MPPS V18 update to V21 won’t lock the machine

Tested with PSA MEV17.4 TC1766 Read/Write via Boot Mode okay, used pinouts from Fgtech galletto documentation. Tips from pros here, about a ECU programmer comparison tablet, incl. MPPS v18, ktag, kess, fgtech galletto 4 or fgtech2… Mainly differs from communication/ protocols. Hope this helps.We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect. There is no Update from version 6.070 to 7.003, because Board is different, Board is from Dim Sport, and Software too. Automatic detection of ECU and processor types. No need to select from the list, everything is automatic! http://www.eobdtool.co.uk/wholesale/mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable.html OPEL 1.7CDTI 110CV,125CV DENSO ECUZ17DTJ, Z17DTR, Z17DTH,A17DTH,A17DTR #OPEL 1.7 DENSO HYBRID ECU,CORSA-C, MERIVA

Various ECU pinout for MPPS V18 with breakout cable Various ECU pinout for MPPS V18 with breakout cable

I did the "update from V12 to V16" with the solution to copy the "V12 T0 V16 folder" inside the V12 folder. HW must be direct linked to the sw. It means V12 sw will work well with v12 hw, V16 sw will work very well with according hw, and so on. Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. Yep! Unless you actually go into properties and change it to ALWAYS run in administrator mode. Don't ask me why as i don't know why but this is what I was told to do otherwise the programme will not run.Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory). For MiniCooper, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Skoda, For Porsche, For Renault, For Suzuki and much more. I tried with MPPS v12 NOREAD OFF.exe, from thread but warning stays. does this 128 count down or it always show 128 and just stops working? My MPPS clone arrived yesterday. It works good on Windows 8 and Windows 10 both x64, software will only start when cable gets power from car. Be sure to run as administrator using windows 7. If you will look when they start to sell v13 you will discover that it was after 1 year official v16 was released, or more.