The Wrong Way Round: How Not to Travel to Burma by Motorcycle

Product Information

While squeezing, look at the edge of the lens. If it’s pointing upwards, or if the edges appear to meet, then the lens is the correct way around. If it bends outwards towards your finger and thumb, then the lens is inside out. The first two digits of the code represent the week of manufacture of the tyre and the second two digits represent the year of manufacture. In the example above, the tyre was manufactured in week 35 of 2016. The primary grooves of the tread pattern must be at least 1.6mm deep within the central three-quarters of the breadth of tread and around the entire outer circumference of the tyre (see diagram 1). On tyres where the date code is illegible, for example, due to kerbing or deliberate tampering, a major or minor defect must be recorded, depending on the location of the tyre. Retreaded tyres if a cut which is more than 25mm or 10% of the section width whichever is the greater, is opened with a blunt instrument and cords can be felt but not seen - fail

The 1.0mm tread depth requirement applies to the whole tread width if the original tread pattern did not extend beyond three-quarters of the tyre width when new. In simple terms, grooves containing tread wear indicators (TWI) or grooves cut as deep as those containing the wear indicators when new, are considered to be primary grooves. Other grooves or sipes that are not cut as deep as the primary grooves are secondary grooves and are not to be considered when assessing tread depth. Double glazing units are specifically designed to be installed in a certain way, with one pane of glass facing the inside of the room and the other facing the outside. This is to maximize the insulation and noise reduction properties of the windows. When using Pilkington K glass with frosted windows (where the frosted glass should be on the inside), then the K glass layer is put at the outer glass pane - cos they cannot coat frosted glass. You may just decide to live with it - as I said, I don't believe you'll notice any difference; the most important thing is that they are double-glazed.

It is common for the valves to leak a little as your child grows older, but if this becomes severe, they sometimes need further repair or even replacement with an artificial valve. If the valve is replaced, this will need to be monitored to make sure the replacement is working effectively, and an artificial valve may need to be replaced as the child grows. NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives

Overtype Mode is where your cursor overwrites any text that is present on and after its current location Standard’ car tyres have a nominal aspect ratio of 82% (unless marked otherwise) and these are almost identical in size to tyres with an aspect ratio of 80%. They can be safely mixed in any configuration on a vehicle. To ensure maximum efficiency and prevent potential issues, it’s important to have double glazing installed correctly. Chris was a PCWorld columnist for two years. He founded PCWorld's "World Beyond Windows" column, which covered the latest developments in open-source operating systems like Linux and Chrome OS. Beyond the column, he wrote about everything from Windows to tech travel tips.Asymmetric tyres are marked with correct fitment information on the sidewall, such as ‘outside’. However, if an asymmetric tyre is fitted the wrong way around it is not to be considered a reason for rejection. The presenter should be advised. Tread depth Rotating the image doesn't exactly help, either. Change it in an old application that doesn't understand the Orientation tag and the application will move the actual pixels around in the image, giving it a new rotation. It'll look correct in older applications. Open that image in a new application that obeys the Orientation tag and the application will obey the Orientation tag and flip the already rotated image around, so it'll look wrong in those new applications. Traditionally, computers have always rotated images by moving the actual pixels in the image. Digital cameras didn't bother rotating images automatically. So, even if you used a camera and held it vertically to take a photo in portrait mode, that photo would be saved sideways, in landscape mode. You could then use an image editor program to rotate the image to appear in its correct portrait orientation. The image editor would move the pixels to rotate the image, modifying the actual image data. Don’t worry, we will also provide tips on how to ensure your double glazing is fitted correctly. Common Misconceptions About Double Glazing Installation Don’t take any chances with your double glazing installation; hire a professional and enjoy the benefits of properly fitted windows. Conclusion