Joined in 2023 
82 
63 About this deal
The SC21 is a 300mm USB-C to Lightning cable which is included with the AI-Micro. Similar to the SC15, it is MFi-certified, making it suitable for connecting RØDE microphones and devices with a USB-C output to iPhones or iPads with a Lightning input. SC22 – USB-C to USB-C Cable (300mm)
Of course, you would want to prevent as much external noise from completely ruining your audio recording, and that is why you should look for cables with excellent interference shielding. Unlike the TRS, the TS (tip-sleeve) unbalanced cable can relay stereo signals in long cables without interference. This allows you to give your fans a great show because you can move freely without worrying about noise distortion in your sound. Types of TRS Connectors Balance. XLR cable is always, always balanced, which means there is less likelihood of noise and interference. This also makes the audio quality superb. Inflexibility. The equipment you are using must be compatible with XLR cable, which means the equipment must be a female port and the connector must be a male port. Inside this cable are three wires designed to carry the left (or hot) signal, right (or cold) signal, and the ground. TRS cable is great for both mono and stereo signals, which means it is excellent for headphones and other equipment where a balanced connection is preferred. TRS cable is also a safe choice for plugging the equipment into two or more devices. TRRS Cable
Cables will likely be tripped over by or get tugged a lot of times, especially in small studio-type spaces, so you would want a cable with good impact absorption that can easily take these occasional tugs without being damaged. Interference shielding Most professional music creators and producers prefer XLR over TRS, but there are cases when the latter is a more sensible choice.
TRS connectors are easy to use and don’t need any extra equipment or cables to connect them. On the contrary, XLR requires an adapter to convert them into a TRS connector and then an additional cable between the adapter and your speaker system. If you’re a creator, there’s a good chance you use multiple microphones to record with multiple devices in a wide variety of scenarios. This may mean the cable that came with your microphone doesn’t quite do the job in every scenario you need it to – either it’s not the right length, or the connection type is wrong for your recording device. Thankfully, we offer a range of high-quality cables and adaptors to suit a wide variety of applications. The main benefit of using an XLR balanced cable is its high sound quality compared to other types of plugs. With an XLR connection, the noise gets reduced, and sound quality is improved because each balanced signal travels through two wires instead of just one. TRS to TRS vs TRS to XLR Connections: Which Is Best for Your Needs?
What are XLR cables?
As you can see with the differentconnections listed above, it’s important to pay attention to what type of cable is required for your microphone and recording device. There’s nothing more frustrating than trying to plug in your mic and realising your cable is the wrong kind! The SC2 is a 3.5mm TRS to TRS patch cable used for connecting microphones or wireless receivers to cameras. The coiled cable means that the SC2 can easily extend from 170mm to up to 400mm.
The SC9 is a TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RØDECaster Pro. SC10 – 3.5mm TRRS to TRRS Cable There are three common TRS connector types: stereo, mono, and balanced. So what does each stand for?
When people say “microphone cable”, they are most likely referring to XLR cable – the standard microphone connector used since the 1950s. XLR connectors transmit balanced mono audio and sometimes stereo signals. It is commonly used to send and receive audio signals between devices. It has a balanced connection that resists noise or any kind of interference.
This article advises you on the best connector between XLR vs TRS cable. So let’s get this debate going! What Is a TRS Cable?
Cons of XLR cables
Lightning – Utilised exclusively by Apple products, Lightning is an 8-pin connector that carries a digital signal for power or data transfer. If you’ve owned an iPhone over the past 10 years, chances are you’ve come across this cable before to charge your device or connect it to a computer. Ok, let’s dive into our wide range of cables for all your connection needs. SC1 – TRRS Extension Cable (6m) The bottom line is – XLR is fantastic for studio recording, and also works well for live performances. If superb sound quality is what you are after, XLR is your best bet.
Great Deal 
New Comment