Granville 0121 Multi-Purpose Grease Tin, 500g

Product Information

These days I never line the sides of the tin. I find that greasing and flouring the sides, together with the paper in the base of the tin, means that you don't need to line the sides with paper too. If you do melt the grease in the house, try to have all the windows open, an extractor fan at full power,

keeping the grease inside the rollers, if a roller moves up and down excessively or to easily, the seal is broken for sure.If you're a fan of the classics, this mini funfetti cakewith chocolate cake batter buttercream will make your heart happy. Race bikes, off road race bikes and high end road sports bikes as mentioned before will not use any type of sealed chain (O, X, Z etc..). even on a chain that's only a few days old, they often blame the user for the failed chain (its hard to prove if the chains to blame or the user).

This is due to the grease keeping the chain resistance low, so wear is substantially reduced and stays reduced,

The non split chain means they have to part disassemble the bike to get it off and then they put a new on. With a traditional chain (non O, X or Z ring), the grease inside is not protected, so over time it is pushed / washed out and dirt and grit gets inside it. Put the grease's metal tin on top of a heat source like a cookers hob to melt the grease (chain will fall in to melting grease). Now take another piece of parchment paper (I use the off-cuts from the step above) and scoop up a little butter. Use this soft butter to coat the inside of the tin - paying particular attention to the sides of the cake tin. Race people have very experienced mechanics and spend a fortune in parts and labour for every race!