Grandstream HandyTone HT801 ATA

Product Information

There are 3 LED buttons on HT801 and 4 LED buttons on HT802 that help you manage the status of your Handy Tone. Once the GXW42xx V2 device is upgraded to 1.0.3.x+, it cannot be downgraded to 1.0.2 x or earlier version. To toggle between incoming call and current call, you need to press the “flash” button the first call is placed on hold.

When all the FXS ports are registered (for HT802), the simultaneous ring will have one second delay between each ring on each phone. Rebooting the HT80x from Remote The following guide will be a useful guideline to help configure Grandstream adapters with your sipgate account and applies to all adapters from the HT series, e.g. HT 801 / 802 / 812 / 814 etc.

Target Market and Availability

This section documents significant changes from previous versions of the user guide for HT801/HT802. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. During an active call, press “Flash” button on the analog phone (if the phone has that button) to place the call on hold. Please note that we are unable to offer any advice on connecting the Grandstream HT801 to other VoIP internet phone services. Related products

FXS port to connect analog phone / fax machine to the phone adapter using an RJ-11 telephone cable. It is therefore ready to use immediately and is supplied with a call bundle of 20 minutes of UK landline and mobile calls for use during a 14 day trial period. GXW42xx V2 has "V2" printed for model name. For example, "Model: GXW4216 V2". If the model name doesn't have V1 or V2 printed, the device is GXW42xx V1. To toggle between incoming call and current call, you need to press the “Flash” button. The first call is placed on hold.

Follow the instructions in your device manual to access your Grandstream Adapter's Web Interface menus. Finally, if experiencing downtime is a concern, Grandstream’s HandyTone Series includes a failover SIP server, which automatically switches to a secondary server if the main server loses connection. Automatic provisioning makes system setup a manageable process for those with varying degrees of technical knowledge.

The HT801 and HT802 are designed for easy configuration and easy installation, to connect your HT801 or HT802, please follow the steps above: Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial “*93”, wait for dial tone, then hang up. Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. Phone A presses Flash (on the analog phone, or Hook Flash for old model phones) to get a dial tone. Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds;These ATAs are all similar in nature. The major difference between the adapters is that the HT801 has one FXS port. Grandstream’s HT802 adapter has two.

Grandstream’s HT818 gives users access to the above features and has a total of eight FXS ports. Advantages of Grandstream’s ATA HandyTone Series Failover is another piece of the HandyTone adapter puzzle. Unlike switchover, failover does not require human intervention. This means, Grandstream’s SIP server automatically switches to a secondary server if anything goes awry. Alternatively, the HT801 can easily be reset to its default settings and configured for connection to another VoIP internet phone service. For GXW42xx V2 device on 1.0.1.4 or earlier version to upgrade to 1.0.17.1, the HTTP firmware upgrade path is: The Ethernet LED lights up when the HT801/HT802 is connected to your network through the Ethernet port and it flashes when there is data being sent or received.Note:DP730/DP722/DP720 firmware can be upgraded once the connected DP750/752 base is upgraded to new firmware. The firmware version on DP730/722/720 can be different from the base. Please refer to the release notes for the handset version number. The screenshots below are taken from an older firmware version. With newer version adaptors, the field entries are still correct information entries it's just that some fields have moved and are now in the FXS port tab. With the later firmware editions, please make sure to set "enable port" to YES before saving. The call waiting tone (3 short beeps) indicates an incoming call, if the call waiting feature is enabled. Assume that the call is established, and phone A and B are in conversation. Phone A(HT801/HT802) wants to bring third phone C into conference: The Power LED lights up when the HT801/HT802 is powered on and it flashes when the HT801/HT802 is booting up.