Fiskars XSharp Axe and Knife Sharpener, Ceramic sharpening stone/Fiberglass reinforced plastic case, Black/Orange, 1000601

Product Information

You can also use the Fiskars axe sharpener, which is a simple ceramic pull-through sharpener. It can’t deliver as clean an edge as a stone, but I was quite surprised by how good an edge it can produce. It’s super fast and it’s really easy to use. I have to admit I was surprised by how well this cheap little sharpener worked. It’s true you can get a razor-like edge with a sharpening stone, but getting good enough to achieve that takes a fair amount of practice. Learn how to reduce chipping and fully maintain your Fiskars axe here. Fiskars sharpener instructions You can lightly run the edge through the sharpener a single time (maybe it comes off). But the best way to clean the edge is through stropping.

Clean away any dirt or wood fibers from the surface of the axe head, as it will be full of moisture. Sharpening a Fiskars axe requires a few tools to make its blade sharpen. But the basic solution is to use a sharpener. Simply slide the blade into the right slot and roll it a few times to restore the blade’s optimal cutting bevel. This handy little woodland companion features optimum sharpening angles for both Fiskars axes and knives, as well as an easy-to-use mechanism.When chopping with an axe, the axe must perform well; however, an axe with a dull blade should not be used to cut trees. Therefore, it is essential to knowhow to sharpen a Fiskars axeto get better results. The sharpener has an optimised sharpening angle for Fiskars blades with an easy-to-use mechanism. It is compact in size for convenient portability.

Here are the three techniques of the Fiskars axe sharpening process. That will help a user decide which is thebest axe sharpener. Technique One: A Large Sharpening Stone While most of a Fiskars axe is fairly indestructible, the cutting edge will dull with use and can chip or roll. It’s a fairly common criticism of Fiskars. The 30-degree flat grind edge is sharp but more delicate than a convex grind. Combined with a bit softer steel and you are going to have to do some sharpening. Sharpening your favourite cutting tools methodically can take up to an hour. Instead, someone might simply polish his axe blades using this Fiskars sharpener. There’s no struggle with the ceramic roller because it sharpens at an exact 30-degree angle. Moreover, the user’s fingertips will never be in danger in this process. But still, a user can gain good knowledge abouthow to use the Fiskars axe sharpener. Technique Three: Smith Diamond Flat SharpenersA rolled edge is when the fine sharp point of the blade gets bent, or “rolled” to one side. It may not even be noticeable at a glance but if you touch the sides of the blade edge you will feel a thin “wire” or “lip” of metal off to the side, right at the tip. Reduce pressure and strokes at the end, ideally finishing each side with one or two light strokes to keep the edge sharp and clean.

In the case of sharpening an axe, Fiskars needs more attention. The Fiskars axe is quite special compared to a normal axe. Fiskars axe does not support the DIY sharpening process that much. So, theFiskars axe sharpeneris the solution. What is the Process of Sharpening a Fiskars Axe? The wider angle will be stronger and more supported, withstanding more impacts without chipping or rolling. This wider second bevel won’t be as useful for tasks like carving, but that’s not really what Fiskars are good for anyway. It will still chop and split well. The Fiskars sharpener is an incredibly versatile tool because it can be used to sharpen both an axe and a knife. In addition, the Fiskars knife and axe sharpener are extremely simple to use. WD-40 is a common solution, but gun oil, boiled linseed oil, and other solutions work great. I have a full article on every way I know to prevent rust on an axe. One method even includes bacon. If rust does start to form in those grooves (or anywhere on the head), I’ve found steel wool or a wire brush are the best way to get in there and clean it out.Sharpen your blades with Fiskars Xsharp Axe & Knife Sharpener The Fiskars Xsharp™ Axe and Knife Sharpener acts as 2 sharpeners in one. Wood preparation requires that you have the sharpest tools for making the cut. If you chop a lot of wood, it's only a matter of time that your blades will dull. Regular maintenance keeps your Fiskars Axes and Knives sharp and safe. This handy portable tool features 2 sharpeners in 1. Ceramic grind stone has clearly indicated cutting grooves for either axes or knives. Just run the blade through the right groove and roll it a couple of times and your blade will restore its optimal bevel for cutting. This handy little forest companion has optimized sharpening angles for both Fiskars axes and knives and its easy to use mechanism makes it a breeze to work with. It's also small enough to carry along wherever you go. I keep an X15 permanently in the trunk of my SUV – all seasons. And in my area, we can go from 40° C to -30° C (100° to -22° F) at the extremes.

Sharpening the surfaces of a Fiskars axe and getting a fine-grit Smith Diamond sharpener is a good option. The combination of bench stone, multiple layers of micron-sized monocrystalline diamonds, and a unique sharpening surface with an overlapping oval hole pattern make this sharpener up to the mark. File with the single cut side. Axe files will often have a single cut and double cut side – the single cut (straight lines) will be smoother and remove less material per stroke. The double cut side will criss-cross and is for aggressive material removal. Any pull-through sharper may leave little wires, burs, or particles of steel clinging to the edge and the Fiskars is no exception.

Buy it with

This invention collects and holds the metallic flakes of the sharpener that build up normally during the sharpening process, which increases the speed of the honing process.