Oase FiltoClear 6000 Filter Set

Product Information

Three filter foams (instead of the two previously) for even more thorough cleaning – from FiltoClear 13000 onwards Please be aware, it is possible we may deliver the Goods in advance of any estimated delivery date. Changing the foams within the Oase Filtoclear is really simple. Once you have removed the clip from the unit itself use the cleaning handle to pull the foams and the lid away from the body. You will see the bottom plate has two screws as shown below, these both need to be removed and are Philips head fittings. Once the screws are removed, the bottom plate will slide off, this will allow you to slide the foams out, you will then be able to give the unit a good rinse with a hose pipe and clean the upstand as shown in the first picture. Once you are happy all the debris has been removed, fit your new foams and your filter will be ready for use. The foams will need replacing approximately every 2 years, you will be able to tell when they need to be replaced as they will have become misshaped and will no longer fit flush with the body of your Oase Filtoclear.

Features a valve that allows cleaning without taking it apart, a clever handle on top allows you to compress the foam layers to remove sludge from the filter FREE UV Bulb when you buy a FiltoClear - just add the FiltoClear to your basket and we'll do the rest!

These Oase Filtoclear Pond Filters are a highly developed range of pressure filters designed with ease of use and quality filtration in mind.

Liability will not be accepted for any items returned due to damage, accident, neglect, improper installation or use.New pull-out mechanism that allows filter sponges to be conveniently cleaned without having to get dirty or disassemble the whole filter

The Oase Filtoclear 20000 Pond Filter is a highly developed pressure filter designed with ease of use and quality filtration in mind. In the below pictures you can see the three symbols that appear on the Filtoclear. The first picture is the sludge drain, this is where the water comes out when you're cleaning your Filtoclear. The second picture shows fish, this outlet goes to your pond, and the final picture shows a pump and this is where you put the hose from your pump to. Items returned that are not deemed to be faulty or the fault is not covered under the guarantee will be subject to return postage costs.For your own protection, we recommend that goods that are to be returned, are sent via a recorded delivery service with sufficient insurance to cover the cost of the goods. OASE has always created high-quality solutions for natural-looking water gardens. FiltoClear is one of the cornerstones of our pond solutions. Now we are taking the pressure filter to a completely new level of quality: If a product fails during the first 6 months, Aquatix-2u Ltd will cover the return costs. After 6 months the cost of returning the product will lie with the customer, as per the Consumer Rights Act 2015.