Everbuild 403 Premium Concrete Hardener and Dustproofer, 5 Litre

Product Information

Although priming is recommended for some concrete paints, many products are self-priming and can be applied directly to bare concrete. Be sure to follow the paint manufacturer’s recommendations. Also adhere to the manufacturer’s guidance for minimum air and surface temperatures during application, especially when painting outdoor concrete surfaces. In most cases, temperatures should be above 50° F. Do not ingest. In the event of ingestion, do not induce vomiting, drink plenty of water and seek medical attention. Concrete Hardener & Dustproofer is a low viscosity, premium grade chemical, specifically formulated to seal and harden concrete surfaces. For paint to adhere properly, the concrete should also be dry and free of trapped moisture. An easy way to test the moisture content of concrete before painting is to duct tape an 18-inch square of clear plastic onto the surface and leave it in place for 24 hours. If condensation collects under the plastic after that time, the concrete is too damp for paint application and needs additional drying time. Learn more about reducing bond failures caused by moisture-vapor transmission. ARE CONCRETE PAINTS SLIP-RESISTANT?

Fully penetrating sealer – these concrete sealers are also referred to as densifiers. There are a number of variations of densifiers/Fully penetrating sealers, but their characteristic is that they work by chemical reaction with “free lime” inside the concrete matrix and do not leave a surface coating. More on these later…… Using a soft broom, or hand brush for smaller areas, work Sika FastFix All Weatherinto the joints. Make sure each joint is completely filled and the material well compressed. Residue could be harmful to children, animals or the environment. Replace lid and dispose of container in accordance with local regulations.Some people are more sensitive to chemical products than others. If irritation occurs discontinue use. Use Sika FastFix All Weatherin small manageable amounts. Avoid spreading over a large area before application. Ensure material is all loose by raking through. Do not try to break up and use any small set lumps. Do not add any extra sand.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.Removing an existing coat of paint can be difficult but not impossible because paints don’t penetrate into the concrete, as do stains. If the paint is peeling or blistering, you can often remove it with a wire brush, paint scraper, or power washer. To remove multiple layers of paint, try a gel-based paint stripper specifically for concrete and allow it to remain on the surface to give it a chance to penetrate and go to work. Once the paint is completely removed, you can repaint the surface or apply another type of decorative finish. Learn more: How to Remove Paint from Concrete None of these terms affect your legal rights and these are not diminished in any way. If any term is held to be invalid under any applicable statute or rule of law, that term is automatically omitted from the terms to minimum extent necessary to comply with the law and without affecting the validity or enforceability of the remainder. Concrete sealer can come in many “flavours” (please don’t taste them). There is much confusion and misconception about different types of concrete sealer. In this article I will discuss clear concrete sealers. We will classify coloured sealers as “concrete coatings”. They still seal the concrete but we will confuse the matter. Seals and hardens concrete floors by penetrating into the concrete to give a robust non-dusting surface with improved resistance to oil and grease. Multicrete Products CONCRETE HARDENER & DUSTPROOFER is ideal for use in garage workshops and factories with both newly fitted or existing concrete floors.