T4 Fluorescent Tube / Bulb 10W

Product Information

Despite being an older model, the T12 fluorescent tube lights still offer a range of color temperatures at different watts. However, their limited lifespan of 15,000 hours still makes T12 fluorescent lights a less attractive option compared to the smaller fluorescent tube lights or LEDs. Frequently Asked Questions: T4 fluorescent fittings have been discontinued since 2015 due to EU regulations. The electronics are located in the light fitting and not the tube. If you are finding your lamps are not lasting as long as expected, this would indicate a fault in the light fitting and not the tube - unless the tube is physically smashed it's very unlikely to have a fault. You can test tubes and fittings by swapping tube from another working fitting. Unfortunately manufacturers no longer provide a guarantee for T4 tubes, as the light fittings they are installed into may be approaching the end of their life. There is no industry standard for the length or wattage of T4 tube lights. They can range anywhere from 6 watts to 30 watts, the lower the number the lower the energy consumption , and many lengths. T12 lamps are the least popular size. This is because they use older technology that is less energy-efficient compared to the smaller options.

Fluorescent tubes are measured in eighths of an inch, with the measurement being drawn from pin to pin at the end of the tube. The wattage level is dependent on the length of the fluorescent tube. The sizes of fluorescent tubing range from T2 to T17. Production of the largest size T12 (38mm) has ceased. However, they featured the same G13 cap as the T8 tube. This means that it is possible to replace the T12 tube with a more efficient T8 of the same length. Now you know all you need to about fluorescent tubes sizes and their differences. But below we will answer the questions that people ask us the most. What is the difference between T5 T8 and T12 lights?

Ideally, there will be legible coding on the fluorescent tube indicating the key characteristics. As an example, you might see the code F32T8. The F in this instance will indicate the fluorescence. The 32 corresponds to the number of watts or length in inches. The T is specific to the tubular shaping. Finally, the 8 corresponds to the diameter in eighths of an inch (this may be represented in millimetres rounded to the nearest millimetre). What Does a Starter Do in a Fluorescent Light? coming under the category of bulk standard white, this colour temperature is considered suitable for a wide variety of commercial purposes

However, there are still many office spaces and homes that use the T12 fluorescent tube lights, especially in older buildings. Another reason why they are still used is the cheaper purchasing price compared to the others, but, they are no longer being made. T12 fittings use a magnetic start ballast which is less energy efficient. The smaller and newer models have already been fitted with the more energy-efficient electric ballasts. The ballast is what regulates the current to the fluorescent lamps and provides sufficient voltage to start the lamps If you would like to switch out a T5 light for a T8 light or vice versa then you will need to use a ballast. Finding the correct ballast size may also take some effort as there is no industry standard for them. T12 TubeThere will be some variation in the amount of lumens generated by fluorescent bulbs given the type and efficacy of the lamp. However, the majority of fluorescent bulbs generate between 45 and 100 lumens per watt. A 20-watt tube may then be expected to generate between 90 and 100 lumens. The wattage and lumen levels have a direct bearing on running costs. How Much is a Fluorescent Light Bulb?

Both the colour temperature and colour rendering index will have a bearing on the appropriate choice of fluorescent tubing. The colour temperature corresponds with the warmth of the light. Warmer tones will have a yellowish appearance, while cooler shades will be relatively bright. These light sources are unusual, smaller fluorescent fittings that were previously installed in a variety of different applications to provide customers with bright general lighting in homes, commercial properties, or offices. Although they aren’t as common anymore, you may still have existing fittings that need replacing. If you’re looking to replace a current fitting in a unit you’ve already got, we have a wide selection of T4 tubes. Once considered most effective in large spaces, like schools and supermarkets, fluorescent tubes were also found to be just as effective in smaller spaces like garages, conference rooms or simply under your stairs at home. Wherever your fitting is, we provide a vast selection to accommodate what you’re looking for. Fluorescent tubes fall under the classification of hazardous waste due to their mercury content. Care should be taken during the disposal process as part of your commitment to environmental and legal compliance. It will be important to switch off the power source before detaching a fluorescent tube. The tube may then be wrapped in paper or towelling to prevent breakage. The tubing can then be transferred to recycling or hazardous waste disposal in accordance with the legal requirements. What Do the Numbers Mean on a Fluorescent Tube?If you are using T5 lights for garage lighting or an art display, then make sure that you choose a model with a higher Color Rendering Index, CRi. The CRi of T5 fluorescent bulbs generally range in the lower end of 70 -80 but there are options with more accurate color rendering up to 95. Basically that means the light color can go from daylight white to extra warm white. T8 fluorescent tubing is the ideal option if you want to see a good level of detail. The high levels of colour rendering allow property areas and items to be shown to full effect. These tubes have a life expectancy of up to 15,000 and require a relatively low level of maintenance. Are T8 and T12 Fluorescent Bulbs Interchangeable?

As previously mentioned, fluorescent tubes range from the modern T2 to the old style T12. The slim-line T2 tubes feature a W4.3 fitting and a 4.3 mm wide push fitting. T4 tubes are best suited to under-cabinet lighting and have a G5 fitting with 5mm separating the two pins. Standard T8 tubes have a G13 fitting, with 13mm separating the pins. The T12 tubes came complete with the same G13 cap as the T8 tube, meaning that older T12 tubes can be replaced with T8 tubes. Wattage of Fluorescent Tube T8 lights are a good choice for an adjustable lighting system because of their color temperature range from a soft yellow-white to bright daylight. You will also have several options that you can connect to a dimmer.Think about these differences in tube lighting the next time you need to convert fluorescent lighting to LED. The different sizes are not directly interchangeable so if you want to use another size then you will have to do a bit of handiwork. T4 tubes are the smallest of the fluorescent bulb sizes, at only 4 eighths of an inch (0.5 in). Their size is what makes T4 lights popular for under cabinet lighting purposes and accent lighting for displays or a staircase. This 30w bulb is 748mm long excluding pins and 762mm long including pins. The manufacturer specifies a tolerance of +/- 2mm for these tubes.