KSIPZE 10m Led Strip Lights RGB Music Sync Color Changing, Bluetooth Led Lights with Smart App Control Remote, Led Lights for Bedroom Lighting Flexible Room Home Decoration

Product Information

If your Ksipze Led Light Strip isn’t connecting to Bluetooth or you’re experiencing any of the issues mentioned above, try the troubleshooting tips below to fix the problem. How to Fix Ksipze Led Light Strip Not Connecting to Bluetooth In addition to preset brightness and color options, some LED lights come with other modes, such as fading and strobing. Length Interference from other devices can cause connectivity issues with your Ksipze LED light strip. Try turning off other Bluetooth devices in the area or moving the light strip to a different location to remove all interference. Most LED strip lights offer many color options, allowing you for color-changing between red, green, blue (often shorthanded to RGB), and other colors so you can adjust the color temperature depending on your mood. Others have multicolor options so you can display more than one color at a time. White LED lights are also a popular option. Brightness If you’re having issues connecting your Ksipze Led Light Strip to Bluetooth, try the troubleshooting tips below to fix the problem:

The cut points are usually located every few inches or so, depending on the model of the LED light strip that you have. How to Cut Ksipze Led Light Strip

Step 4: Insert the Ksipze LED light strip into the magnetic clips, pressing down firmly to ensure a secure hold. Depending on how much paint there is, the strips can sometimes be saved! You can wipe the paint off the strips. Do not use any water-based products or that will damage the LEDs. You can also scrape the dry paint off the LEDs with a fine knife. Make sure the strips are turned off. I have done this successfully many times, and the strips worked perfectly afterwards. The brightness of LED lights is typically measured in lumens, with standard-density lights producing an average of 540 lumens per meter and high-density lights producing an average of 1,080 lumens per meter. If you want to ensure that your LED lights brighten your entire room, make sure you look for types that have a high luminosity. Some lights also offer adjustable brightness if you want more light while you’re reading or a more dimmable light while watching TV. Modes Let’s imagine that it’s the blue cable that is not working. In such a case, you should then see that the Blue lights will light up, proving that they work – which means you have a bad connection somewhere else. With this knowledge in mind, rebuild the system step-by-step, adding the controller (and extension cables if you have them) and see which component makes the Blue lights stop working.

The built-in mic makes the LED lights color-changing with ambient music. You can easily create a party atmosphere with the Ksipze Led Light Strip. How Do I Reset My Ksipze Led Lights? Make sure that you have the latest version of the HappyLighting app installed and that your device’s Bluetooth is turned on and functioning properly. If the app is not working correctly, try uninstalling and reinstalling it. If you have a 24V power supply going to 12V strips, you can resolve this by getting a 12V power supply, or you can find a converter that converts 24V down to 12V (this would wire in between the power supply and the strip). To cut Ksipze LED lights, locate the nearest marked point on the Led Light Strip then, using a pair of sharp scissors cut along the marked line carefully, making sure not to cut through only the marked points.

Before you begin, it is important to have all the required accessories and tools, including the Ksipze LED light strip, power adapter, scissors, and a clean, dry surface on which to install the strip. Remember to always follow safety precautions and consult with a professional if necessary to avoid damaging the Led Light Strip. Interference from other Bluetooth devices may be the reason why you’re having issues with your Ksipze LED light strip. Turn off other Bluetooth devices in the area or move the light strip to a different location to remove all interference. Step 3: If there’s a reset button on the remote control or the Light Strip, press the reset button to reset the Light Strip. Final Words

The same with option B: if +ve and -ve and are touching somewhere, then the strips will fail within hours and LEDs will be be damaged. You may even smell burning and this could be a fire hazard,

Turn off or disconnect other devices that may already be connected to your Bluetooth connection. Bluetooth unlike Wi-Fi has a limited number of devices that can connect to it which is usually one. Interference from other Bluetooth devices may also cause connectivity issues with your Ksipze LED light strip. Also, if other devices are already connected then your Light Strip won’t be able to connect to Bluetooth because only a limited number of devices can connect to Bluetooth. Problem: MY STRIPS ARE SHOWING INCONSISTENT COLOURS IN PATCHES (e.g., cool white strips are showing warm white in sections) A software issue with the app or Bluetooth connection itself may also be responsible for your device not connecting to Bluetooth. Once you have all the necessary items, follow these instructions to install your Ksipze LED light strip:

Here are some of the most important factors to consider when deciding which LED lights are best for you. Location This problem has two possible causes. Either (A) You you have a 24V power supply connected to 12V LED strips. Or (B) there is a ‘short’ along the strip – in other words the solder has gone across the PCB somewhere and the +ve and -ve are touching, shorting the circuit. Or if you have an output cable, the output +ve and -ve may be touching. Ensure that you have the latest version of the app installed and that your device’s Bluetooth is turned on and functioning properly. Restarting your device or resetting the LED light strip could also help to resolve the issue. LED lights have a wide range of applications since they are easy to install almost anywhere. Here are some suggestions for how to use LED lights in your home:You have paint on them! Very simply I have seen this issue hundreds of times, if you have a cool white strip and then in random sections of, perhaps, 50mm you see warm white (or they appear to be completely ‘off’) then this is because they have been painted on. Once you have cut the strip to the desired length, you may need to add connectors or solder wires to the cut ends to reconnect them to the power supply or other parts of the LED lights strip. Note: Make sure the power is off when you cut the strip lights and you need to buy some connectors to connect the Strip after cutting it. Remember, do not cut the light strip randomly to avoid damage. How to Install Ksipze Led Light Strip on TV