WAGNER Airless ControlPro 250 R Paint Sprayer for dispersion/latex paints, varnishes & glazes, covers 15 m² in 2 min, 110 bar, adjustable spray pressure, 9 m hose

Product Information

Hose Length: The Wagner 350M comes with a longer hose, typically around 15 meters (approximately 49 feet), offering greater reach and flexibility during painting tasks. In contrast, the Wagner 250M features a hose length of around 9 meters (approximately 29.5 feet), which may be more suitable for medium-sized projects with less distance to cover.

The Control Pro 250 R is a compact airless paint sprayer with a carry handle, which is designed for experienced DIY'ers. It allows you to work with all solvent and water based paints, varnishes and wood preservatives as well as emulsion and latex paints. The Control Pro 250 R is from a completely new generation of Airless paint sprayers, which are equipped with High Efficiency Airless, or HEA technology. This is based on innovative nozzle technology combined with a highly efficient but pressure-reduced pump. The reduced spraying pressure allows simple and clean working with an Airless device, providing maximum control with up to 55% less overspray. Perfect, streak-free results are possible, even for first-time users.The Wagner Control Pro 250 R is from a completely new generation of Airless paint sprayers, which feature High-Efficiency Airless, or HEA technology. The Wagner HEA PRO 250R is the ideal partner for medium-sized projects, such as new builds or home renovations. It is perfectly capable of spraying all current water- and solvent-based fluids and is specially developed for DIY, building managers and service providers who use spray painters on a regular basis. The model is handy to use, compact and easy to store. This paint sprayer has a plastic housing and is therefore lighter than the M variants. If there were any dribbles, I found that diluting the paint by 5-10% and increasing the pressure resolved this issue. Disconnect the outlet valve and release the tiny ball, which is situated in the disconnected plug, and try priming again. Airless, such as the Project Pro series, has the advantage of being able to handle large surfaces easily and gives a very good finish

Disconnect the suction and the return hoses, release the inlet ball valve that is situated at the bottom, and try priming again. If a leakage occurs during use of the device for the first time, it could be that one of the seals is not properly joined. While a manufacturing defect is not a common occurrence, it is possible in this case.

My first job was spraying fence panels - they were all different ages and colours, so two thinned tins of exterior paint later and I’d sprayed 17 panels in a very short time.