Tommee Tippee Storage Lids, 6-Count

Product Information

Follow the instructions on your machine to dispense the remaining water to make up the feed. DO NOT shake the bottle with a full feed. Remove your items from the steriliser. Be careful as they may still be warm, especially after drying. Clean all parts of the bottle and anti-colic venting system thoroughly. Please follow the special cleaning instructions. To stop a function at any point, press the button that is in use until the lights are no longer illuminated. If you are using the correct teat, then the small slit in the star valve may be closed. It’s really easy to fix. Hold the star valve up to the light and if you can’t see the slit, pinch it gently between your fingers to re-open. If the star valve has sealed closed, your bottle won’t vent properly.

Not suitable for use in a conventional oven or a combination microwave with the grill feature switched on. When making up a feed, follow the formula milk manafacturer's instructions and allow the freshly boiled water to cool before pouring it into the bottle If reheating a feed in the Advanced Anti-Colic bottle, DO NOT fully secure the anti-colic teat with screw ring to the bottle base. There’s no need to boil and cool water when making up a bottle of formula using Perfect Prep. It measures out the right volume of water for different amounts of formula and serves it at the perfect temperature to feed your baby in just 2 minutes. If you wish to re-use the sponge filters, then rinse the sponge in warm water and leave to air dry.When in use, hot air is released from the steriliser. Please keep your hands, face and other body parts away. Sterilise all parts of the bottles and the anti-colic venting system after cleaning and before using. All bottle parts are suitable for sterilisation by steam (electric or microwave), boiling or cold-water tablet/liquid solution. In storage mode the steriliser will sterilise and dry the product every 2 hours, until the steriliser is switched off with the power off button.

DO NOT leave the star valve on the bottom of the venting tube during cleaning. DO NOT use the venting tube cleaning brush to clean the star valve. These actions can damage the valve and cause your bottle to leak.We recommend a 4 inches gap to allow for ventilation, this protects your work surfaces and the unit. There may be some residual heat after use. Do not touch hot surfaces, such as the shelf, until these have cooled down. Allow the venting tube with heat sensing strip to return to room temperature before testing the temperature of a feed. If you wish to leave the products inside the steriliser you can use the storage mode which will keep them sterile. Open the steriliser door and remove the blue protective film, wipe clean the inside of the steriliser.

Cost-Effective Choice: Our filter offers a reasonable price without compromising quality, serving better water for your baby at a fraction of the price. An alert sounds when you press any of the buttons and when you open or close the door. You can turn off the sound on the buttons but not when you open or close the door.The screen will illuminate and flash to show the function when in use. The countdown timer will show how long is left in the cycle. ALWAYS use this product with adult supervision. Accidents have occured when babies have been left alone with drinking equipment due to the baby falling or if the product has been dissassembled