Furniture Clinic Wood Stain (Natural Oak) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 250ml

Product Information

Yes, oak wood stains better than pine because it has large, even pores throughout its structure that can absorb stain evenly to create a magnificent look. On the other hand, pine has tight, uneven pores that make staining problematic. Does white oak stain well? Transfer the amount you’ll need to use into a small container to avoid contaminating the whole product.

This obviously won’t be too much of an issue if you are planning on painting over the stain as the paint will cover it, but it is highly relevant if you are wanting to apply a new coating of stain – more on this below. 1. Preparing an Existing Timber Surface that’s Been Stained or Dyed If you try to apply a shade of stain or dye that’s lighter than the finish that’s already on there, the existing finish will over power it.In addition, this product is versatile and suitable for various interior staining projects, such as hardwood floors, wood furniture, cabinets, doors, and more. See Latest Price Dark walnut stain can be lightened with either bleach or alcohol. Both chemicals will remove the dark color and should be applied carefully to avoid damage to the wood surface. Pine & Softwoods – Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained. If you don't have a conditioner, you should wipe the wood down with a wet cloth so the wood becomes damp. After the wood dries, sand it smooth using a #100 Fine Sanding Pad - this process helps reduce the uneven absorbtion of stain often found in softwoods.

A: If you’re lightening dark stained wood, then you should use a primer and two coats of paint. You can also try using an oil-based stain to achieve the look that you’re going for! Q: How do I clean dark stained wood before painting it? If high V.O.C’s already affect you such as petrol, we’d suggest you look at the water-based alternative if you’re a budding DIY’er. If you opt for a pre-stain wood conditioner, ensure you wipe the excess of it within 5 to 10 minutes, just as you do the wood stain. Then allow it to dry completely following the manufacturer’s recommendation before following it through with the stain. A woodworking friend of mine shared this video by Ralph Chapman with me that helped him set up his workshop. A: If the original stain is water-based, then just use a good primer and two coats of oil-based paint to cover it up! This will help ensure that your paint job lasts a long time. Q: How do I remove dark stain from wood?If the stain is oil-based, then use paint thinner as well as rubbing alcohol. Also, try using ammonia if necessary. This will help remove any residue from the old finish so that you can start with a clean slate.