indesit idv75 heating element

Product Information

Most of the time, replacing the heating element on an Indesit dryer will solve any heat problems that it is having.

The OPSS must urgently release the findings of its investigation. If it finds Whirlpool has failed to put the safety of its customers first, the regulator must take robust enforcement action, including a full recall if necessary. Tagged as: But even quality appliances fail sometimes—commonly, dryers start to over- or underheat clothing, leaving you with either a burning pile of clothes or a sopping lump of laundry. The affected Hotpoint and Indesit models now need to be removed from homes, and the company estimates this will affect up to 55,000 machines, in addition to more than 500,000 originally identified. When the drum fails to turn the clothes won’t dry properly and eventually the thermostats will be triggered which turns the heating element off.Which? has heard from more than 30 owners who have said that their 'fixed' tumble dryers have caught fire, produced smoke or the smell of burning. Whirlpool is reaching out directly to customers who have an affected appliance based on details held on their database. The Indesit IDC75 and IDC85 also have a reset switch on one of their thermostats. However, you’ll find the switch on the inside of the left-hand thermostat rather than the right-hand one, like you would in a vented Indesit dryer.

If failing electrics isn’t the problem you may have an issue with the door being unable to close securely. This could be the result of a bent hinge, loose latch screws, or a broken latch assembly. When the door switch is broken, it will be unable to communicate to the control panel that the door is shut, so the dryer won’t turn on. A faulty switch can be identified with the use of a multimeter. Before you go ahead and start to investigate or try to fix your dryer you should always isolate it from the electrical supply so that you can work safely. Below that panel toward the bottom of the dryer, there should be another dark gray panel. Remove all 9 screws on the outside of the pane holding it into place—2 on top, 3 on the left, 2 on the right, and 2 on the bottom. If the problem persists, test the heating element with a multimeter to see if there’s any break in the electricity. The heat control thermostat regulates the heat by opening and closing the heater element circuit. Most Indesit tumble dryers have two thermostats. The other is a high-limit thermostat that cuts power to the heater element if the dryer overheats to prevent a fire.

Manage your cookies

Lastly, a faulty heat thermostat is a common cause. If the thermostat isn’t signalling to the heating elements that the temperature has been reached, it will continue to heat. The tumble dryer will often trip the circuit breaker to avoid causing a fire when it gets too hot.