BENFEI DisplayPort to VGA Cable, 1.8M Display Port of Computer/Laptop to VGA of Monitor/Projector Gold-Plated Adapter (Not Bidirectional,Not Compatible with HDMI or USB)

Product Information

USB Type-C: Newest audio, video, data and power connector. The best connection for laptops and mobile devices DisplayPort cables and ports may have either a "full-size" connector or a "mini" connector. These connectors differ only in physical shape—the capabilities of DisplayPort are the same regardless of which connector is used. Using a Mini DisplayPort connector does not affect performance or feature support of the connection. HDR can be described as the ratio between the lightest and darkest parts of an image. Typically, with standard dynamic range, you’re losing detail at either end of the light spectrum. Expose a scene for the shadow detail and you end up with blown-out highlights or expose for the highlights and you lose shadow detail. HDR allows a greater range of detail across the full light spectrum.

VESA Releases DisplayPort 1.3 Standard: 50% More Bandwidth, New Features". www.anandtech.com . Retrieved 7 January 2016. Yes. Adapters and Adapter cables are available to connect DisplayPort over USB-C to DisplayPort, HDMI, DVI, and VGA monitor inputs.a b "Mini DisplayPort Connector Standard, Version 1.0". Video Electronics Standards Association (VESA). 26 October 2009 . Retrieved 13 May 2018. a b Although this format slightly exceeds the maximum data rate of this transmission mode with CVT-R2 timing, it is close enough to be achieved with non-standard timings We outline the different types of connections below and give you different usage scenarios to help you decide. We’ll also outline the best connection and cable to choose for 144Hz and other higher refresh rate displays. WinHEC 2008 GRA-583: Display Technologies". Microsoft. 6 November 2008. Archived from the original on 27 December 2008. DisplayPort 1.0 includes optional DPCP (DisplayPort Content Protection) from Philips, which uses 128-bit AES encryption. It also features full authentication and session key establishment. Each encryption session is independent, and it has an independent revocation system. This portion of the standard is licensed separately. It also adds the ability to verify the proximity of the receiver and transmitter, a technique intended to ensure users are not bypassing the content protection system to send data out to distant, unauthorized users. [8] :§6

Analogix announces DisplayPort transmitter". 26 August 2006. Archived from the original on 24 June 2013 . Retrieved 10 August 2009. . HDMI cable requirements have changed over time, just like DisplayPort. One of the big advantages is that high quality HDMI cables can be up to 15m (49.2 feet) in length — five times longer than DisplayPort. That may not be important for a display sitting on your desk, but it can definitely matter for home theater use. Originally, HDMI had two categories of cables: category 1 or standard HDMI cables are intended for lower resolutions and/or shorter runs, and category 2 or “High Speed” HDMI cables are capable of 1080p at 60 Hz and 4K at 30 Hz with lengths of up to 15m. The DisplayPort AUX channel is a half-duplex (bidirectional) data channel used for miscellaneous additional data beyond video and audio, such as EDID ( I 2C) or CEC commands. [8] :§2.4 This bidirectional data channel is required, since the video lane signals are unidirectional from source to display. AUX signals are transmitted across a dedicated set of twisted-pair wires. DisplayPort 1.0 specified Manchester encoding with a 2 MBd signal rate (1 Mbit/s data rate). [8] :§3.4 Version 1.2 of the DisplayPort standard introduced a second transmission mode called FAUX (Fast AUX), which operated at 720 MBd with 8b/10b encoding (576 Mbit/s data rate), [37] :§3.4 but it was deprecated in version 1.3.Can I connect an existing monitor to a new computer, tablet or phone that uses the USB-C connector with DisplayPort over USB-C?

Pin 20 on the DisplayPort connector, called DP_PWR, provides 3.3 V (±10%) DC power at up to 500 mA (minimum power delivery of 1.5 W). [8] :§3.2 This power is available from all DisplayPort receptacles, on both source and display devices. DP_PWR is intended to provide power for adapters, amplified cables, and similar devices, so that a separate power cable is not necessary. a b c "DisplayPort Technical Overview" (PDF). VESA.org. 10 January 2011 . Retrieved 23 January 2012.UHBR 10: 4 × 10.0 Gbit/s = 40.00 Gbit/s bandwidth (data rate of 38.69 Gbit/s or 4.84 GB/s with 128b/132b encoding and FEC) Audio data is transmitted across the main link during the video blanking intervals (short pauses between each line and frame of video data). [8] :§2.2.5.3 Auxiliary channel [ edit ] However, transmission mode support is not necessarily dictated by a device's claimed "DisplayPort version number". For example, older versions of the DisplayPort Marketing Guidelines allowed a device to be labeled as "DisplayPort 1.2" if it supported the MST feature, even if it didn't support the HBR2 transmission mode. [47] :9 Newer versions of the guidelines have removed this clause, and currently (as of the June 2018 revision) there are no guidelines on the usage of DisplayPort version numbers in products. [48] DisplayPort "version numbers" are therefore not a reliable indication of what transmission speeds a device can support. This exemplifies why DisplayPort cables are not classified by "version"; although DSC was introduced in version 1.4, this does not mean it needs a so-called "DP 1.4 cable" (an HBR3-rated cable) to function. HBR3 cables are only required for applications which exceed HBR2-level bandwidth, not simply any application involving DisplayPort 1.4. If DSC is used to reduce the bandwidth requirements to HBR2 levels, then an HBR2-rated cable will be sufficient.