Joined in 2023 
82 
63 About this deal
A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer).
Pixels are usually measured in microns (μm). Larger ones are capable of recording more light, hence, will offer better low light shooting and wider dynamic range compared to the smaller pixels. On the other hand, smaller pixels allow for increasing the resolution while preserving the same sensor size.
Display
Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU. Even the K8’s GPU performance was good, as graphics tends to be an area where MediaTek chips have struggled in the past compared to their Qualcomm-based counterparts. In GFX Bench GL’s offscreen Manhattan 3.0 test, for example, the LG K8 scores a very reasonable 188 frames (around 3.0fps), putting it ahead of the 3rd Gen Moto G which only produced 103 frames (or 1.7fps). stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 2G cellular network.
stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 3G mobile network. W-CDMA (Wideband Code Division Multiple Access) is an air interface used by 3G mobile networks. It is one of the three different UMTS interfaces together with the TD-SCDMA and the TD-CDMA. The standard provides faster data transfer speeds and allows more users to connect to the network simultaneously. The rear cameras of mobile devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements.Information about the manufacturer and model of the image sensor used by this camera of the device. UMTS stands for Universal Mobile Telecommunications System. Based on the GSM standard, it is deemed as a 3G mobile network standard. It has been developed by the 3GPP and its major advantage is the provision of greater bandwidth and spectral efficiency, due to the W-CDMA technology. Display The display of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc. Type/technology Information about the number of pixels on the horizontal and vertical dimensions of the photos taken by the front camera, indicated in megapixels as well. Information about the sensor type of the camera. Some of the most widely used types of image sensors on mobile devices are CMOS, BSI, ISOCELL, etc.
System on Chip (SoC) A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device. SoC Information about additional software and hardware features of the rear camera which improve its overall performance. RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted. Design Information about the dimensions and weight of the device, shown in different measurement units. Body materials, available colors, certifications. Width
Accessories and Warranty
Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen.
Related:
Great Deal 
New Comment