Corsair iCUE 5000T RGB Mid-Tower ATX PC Case (208 Individually Addressable RGB LEDs, Fits Multiple 360mm Radiators, Three CORSAIR LL120 RGB Fans & COMMANDER CORE XT Controller Included) Black

Product Information

The fact that access to the HDD cage and to remove the PSU cover's plastic portion all have hidden thumbscrews, and to top that off, one of the cage screws were secured way too tight, making things even tougher, and the hole for the plastic PSU cover part was stripped out of the box. Below the diagram are eleven languages covering the list of parts from A to L, corresponding to the letters noted in the rendering. But Corsair isn’t relying on tradition in the design of its new case: Instead of old-fashioned black anodized machined aluminum plate, fully controllable RGB lighting is the star, highlighting modern finishes on formed steel panels. AIO Chassis as the base of the machine, we are able to provide the ultimate in experiences never before seen in an All In One form factor.

The 208 RGB LEDs can be controlled individually and are therefore particularly suitable for individual RGB themes.Our acoustic test consists of three scenarios: We run the CPU at full load, the CPU and GPU at full load, and an optimized mode. Granted, the company wants you to use its iCue software to control the lighting (iCue is, after all, in the case’s name), but it would still be nice to have a simple way to cycle through a few presets without having to dig into menus with your mouse. While we like the -_- seen at the back edge of the cover and the new //5000T name placement, it comes with an issue. Vibrant RGB Lighting from Any Angle: With 160 RGB LEDs integrated into the front, roof, and floor panels, plus 48 LEDs in the included fans, you’ll get fully customisable RGB lighting. The hub is mounted to the old SSD plate from earlier revisions and is surrounded by another wire management trail.

While FedEx did a number on covering the left portion of the panel, we can still see a rendering of the chassis over a Corsair logo front and center. While having ARGB fans within a chassis is pretty common these days, Corsair has gone the extra mile (or two) to design the iCUE 5000T RGB with embedded ARGB strips in mind. WHAT'S COVERED: Immediate protection against accidental damage, along with cover for breakdowns and faults not covered by the seller/manufacturer warranty. The case is sound and solid in most regards, and even something as trivial as the choice of feet has us enjoying Corsair's choices during the development process.We then see warranty and company info along with a sticker noting the model and serial numbers, while the second covers the color of the case, the material used for the side panel, and that it is RGB. This photo doesn’t show the two SATA power cables needed for the RGB lighting and controller, nor the USB cable that links the RGB controller hardware to the motherboard and thus its software. With everything installed, the Corsair iCUE 5000T RGB looks mostly clean on the inside even with the that inner cover unused, and all the wiring behind the motherboard tray has its proper place as well. For the optimized mode, we run the GPU fan speed at 30 percent and run the CPU and included case fans at their lowest speed. That's fine for the mainstream public however we know the KitGuru audience is fairly hardcore and more interested in go rather than show.

I saw a chance to get paid for my knowledge, and have since written more than a thousand pieces (many of them for the seminal tech site Tom's Hardware) before finding my latest opportunity: with PCMag. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Our Noctua NH-D15 cooler stands at 165 mm tall, just 5 mm short of the side panel, so be mindful about how high you seat the fans. At this time, we also realized that the center opening on either side of the bezel is to allow hands to pull the panels open. Triple tuners allow you to record up to 4 programmes at the same time whilst you enjoy watching a 5 th.Also here: seven slots aligned to motherboard positions, and two vertical slots that allow customizers to mount their graphics card with the fans showing, in vertical orientation, by adding a PCI Express riser cable (not included).

But if lots of RGB and ports, excellent IO and room for big components are features you’re after, the Corsair iCue 5000T delivers. The PSU rides a bit high in the saddle when it slides into the chassis, in fact, enough that we have to pry on the PSU to align the holes. Corsair’s iCue 5000T aims to shine bright in an ocean of RGB cases, with over 200 individually addressable LEDs. Motherboard Tray with Customizable Fan Mounts: Side-mount up to 3x 120mm fans or up to a 360mm radiator, enabling new flexible cooling options. The right side panel of the iCUE 5000T RGB is hung the same way as the glass panel, which allows it to swing open from the front.The side panels are tool free and hinged so you can quickly gain access to your components for a cheeky upgrade or two, and the motherboard tray side of the case features RapidRoute cable management for clean and tidy builds. I loved that case, but with its dual chamber design, the component area was narrower and would heat up more quickly. The front and top panels can support either 280mm or 360mm radiators, while the rear and motherboard panels can support 120mm and 360mm respectively. That said, with a somewhat compact cable channel, things are a bit tight on the front-facing right edge.