Apollo Ultrasonic Füllstands-Sensor Standard Standard Betriebsspannung (Bereich): 150-250 V/AC 1S

Product Information

The bund-warning element is the float switch, which is attached/hardwired to the base of the transmitter.

The receiver is a standard 3 pin plug which can be placed anywhere in the home to suit you perfectly. Remember to switch the power off and then back on before rematching to allow for receiver plug to go into teach mode.The K150 high capacity mechanical flow meter differs from other meters on the market, because it ensures up to 33% less pressure drop.

Ideal for monitoring heating oil and diesel – but suitable too for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. This information is relayed wirelessly to the receiver unit, which cleverly and conveniently plugs into a standard domestic socket, where it is displayed via an easy to read LCD display. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. The receiver unit displays the level of fuel inside the tank, via an easy to read LCD display, which usefully includes a low level warning alert.The Cim-Tek Tank Dryer is a fuel tank water absorber, which has been developed in response to the increasing concerns regarding water contamination of fuel. The K150 ATEX high flow mechanical flow meter is equipped with an oscillating disc reading system that guarantees ±1% accuracy in measuring the fuel delivered at medium flow rates. A tank mounted ultrasonic transmitter unit, compatible with the standard 32mm port fitted to modern plastic oil storage tanks. The GoldenRod 496 Fuel Tank Filter is the water block filter for diesel from the leading filtration brand in the agricultural market. When all ten bars and red light are pulse flashing this indicates that the float switch/sensor has been activated and has detected oil/liquid in the bund area and must be attended to immediately.

The receiver is plugged into mains electricity and by way of bars on the screen indicates the level of oil/liquid in the tank. The second part is receiver plug that can be plugged into an electric socket up to 200m away from the tank, 200 metres is the maximum distance and every building, wall or obstruction between the transmitter and receiver will reduce this distance.The Apollo Visual Ultrasonic comes with two parts, firstly a tank mounted ultrasonic transmitter with level readout compatible with most modern plastic fuel storage tanks that have a 32mm port usually fitted to the tank. The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network. If the tank is filled to the top as described then the oil/liquid will be too close to the underside of the transmitter and will result in intermittent incorrect readings or flashing triangle until the oil/liquid level drops to 100 – 120 mm from the top of the tank. The Apollo transmitter uses high-quality FM signal because it is less prone to interference when compared to AM signal.