Watersafe Drinking Water Test Kit for Lead (Single)

Product Information

Nearly half of US tap water—both from public utilities and from private wells—contains PFAS, according to a 2023 US Geological Survey study.

The accuracy of this method was validated by ICP/MS and two types of lead samples were tested, including 107 tap water samples from households in Montreal, and 27 laboratory-prepared samples. The UK maximum contaminant levels (by DWI/DEFRA) for lead in water is 10µg/l (from 25th December 2013), which equates to 10ppb or 0. It has been suggested, that even brass faucets and fitting which are apparently ‘lead-free’ may leach lead. The labs that sell our send-away test kits must be certified by the federal or state EPA to conduct compliance testing on public water supplies; this means, among other things, that they have to use tightly defined testing methods and frequently demonstrate compliance with them. It’s quite simple – find the water pipe where it enters your home, which is usually in a kitchen cupboard or under the stairs.Specialist water treatment chemicals can also be added to the water to reduce lead concentrations, but these measures are only a temporary solution, and definitely not a substitute for replacing the lead pipes as soon as you can. However, recent high-profile examples of lead contamination in Hong Kong and Michigan, USA have highlighted a continuous need for lead monitoring in drinking water networks. In 2001, the American Society of Civil Engineers named the US water supply one of the 10 “civil engineering achievements that had the greatest positive impact on life in the 20th century. Whether you’re a homeowner or a landlord, it is important to test your water, to not only meet the strict water regulations laid out by the Drinking Water Inspectorate (DWI) but also for the health and well-being of your family.

You simply dip a strip of test paper into a sample of your water, and the presence or absence of a blue line tells you whether you have a lead problem.Our also-great pick, the Safe Home Do-It-Yourself Lead in Drinking Water Test Kit, doesn’t have to be sent away—you can get the results at home yourself. Environmental contamination: Lead can also enter the water supply through environmental contamination. Ask your surveyor to check the nature and condition of the outside and internal pipes as part of the survey, making special mention of lead. Then we reached out to all of our contenders to verbally confirm that they actually had the proper paperwork, and we reconfirmed this via public records.

The test doesn’t require any specialist training, can be performed on-site within three minutes and gives accurate results even with low concentrations of lead. If testing water for lead shows its presence in your drinking water, then the obvious solution is to get a plumber in and have the pipes replaced with more suitable materials. Water used for drinking and cooking which has been supplied through lead pipes can lead to a build-up of lead in the body.Therefore, if you have lead pipework, the chances are there will be some lead in your drinking water. Lead pipes are fairly easy to spot as they are a dull silvery grey when compared to the bright shiny copper or plastic pipes which are the modern alternative. Notwithstanding any damages that You might incur, the entire liability of the Company and any of its suppliers under any provision of this Terms and Your exclusive remedy for all of the foregoing shall be limited to the amount actually paid by You through the Service or 100 USD if You haven't purchased anything through the Service. Drinking water with high lead levels may affect neurological development in infants, and boiling the water won't reduce it.