Joint It Simple Jointing Mortar Dark Grey (1 x 20kg) - Large Size

Product Information

While it is important to soak the paving before applying Joint-It Simple, it is equally important to keep it wet, particularly where you are working on a large area (one area might dry out by the time you are brushing the product in), or in warmer weather conditions. However Joint-It will set rock hard and the specialist mix will ensure that it stays in your joints for years to come.

I’ve used joint-it simple on numerous patio’s now from sandstone to limestone to porcelain and I find it a fantastic product. This easy jointing compound provides the ideal solution for professional contractors and homeowners. If further medical attention is required take the tub, or a photo of the ingredients from the tub, with you. Whilst Joint-It Simple is low maintenance, all patios do require an element of maintenance annually, particularly in areas that are shaded from the sunshine or after the colder, damp winter months.Contact with air makes Joint-It Simple harden within a few hours which is why you must soak your paving slabs with lots of water before you open and tip out the bag. I've used joint-it simple on numerous patio's now from sandstone to limestone to porcelain and I find it a fantastic product. We strongly recommend Limestone and Flamed/Honed Black Granite are pre-sealed prior to application of Joint-It Simple. Flat gravel driveways would require sheets of plywood for the wheels of the manual pallet truck to roll on.

It is important to make sure that the bucket is protected from any punctures or piercing as contact with air will start to harden the product. Take care not to brush Joint-It Simple out of joints and into nearby drains as the product will harden within 30 minutes after opening. Depending on the size of your patio and the weather, Joint-It Simple should take approximately 30-40 minutes to apply to a 30m²/323 sq ft paved area.

Very helpful staff, sent me photos of 3 different tiles together and measured the exact tile size so that I could make my decision and advised me on the best colour grouting. To avoid any potential problems when using Joint-It Simple, please watch our step-by-step video guide before you use our product. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.

The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. Joint It Simple paving jointing compound makes it easy to repair joints in your patio without breaking your back. To get the best results when using Joint-It Simple with Porcelain, we recommend that you keep both the top of the stone paving and the Joint-It Simple product saturated with clean water to make Joint-It Simple flow into the Porcelain joints more easily.Sealed Paving first with the Premium Seal and Jointed it the following day with Joint It Simple Light Grey. It has been specially manufactured with seven types of unique, specialist adhesives that give it its strength, this ensures that it will stay in your joints for many years to come.

A quick application of Joint-It So Clean will keep your patio looking refreshed, clean and tidy – removing any lichen, moss and algae that may have settled in shaded areas. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.Again, please take note to keep the paving wet at all times when brushing Joint-It Simple into joints. First time using Joint-it simple, to say I was impressed with the product would be an understatement. This active jointing compound is swept into the joints already soaked with water slabs compatible with all natural stone and concrete paving products.