Beko Washing Machine WM Series Rubber Door Seal Gasket- Part No: 2904520100

Product Information

Originally formed to supply spares to the trade, we now carry over 10,000 different lines and have over 600 appliances on show.

Support for problems with Beko appliances in the forums is generally fairly good due to the volume of products in the field and the availability of spare part and technical information. If you select " Accept", you accept this and agree that we may share this information with third parties as described in our privacy policy. Most door sesls or gaskets for washing machines are reasonably easy to find and identify but, they are mostly all very similar in the way that they look, grey round rubber type thing. Whilst we have tried our best to cover the most common questions here, there are some product and location-specific exceptions that may also result in additional charges. Push the seal through and gently feed it around the outer tub this will be made easier because we put washing up liquid on the edge of the door seal, once the seal is on move it around so the holes drain holes line up at the bottom so any water left in the seal after a wash can easily run into the machine.MANUFACTURERS OFTENCHANGE THE DESIGN AND COMPONENTS OF THEIR APPLIANCES WITHOUT CHANGING THE MODEL NUMBERS AND THIS IS BEYOND OUR CONTROL. Beko also produces appliances for other brands so it is not unusual for spare parts like this one to be fitted to other models and even other makes. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Many of the newer seals will also show as being used in other brands of washing machine or washer dryer. If you need help to find any Beko Door Seals or any other Beko spare part please ask for assistance as we're only too happy to help you.

Talk to engineers that repair applainces and get support from there with diagnosing faults and repair advice. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses. This effect can be helped by leaving the washing machine door ajar when not in use so that the door seal dries out and by regular maintenance washes or use of the Affresh washing machine cleaner, which you can find here use of this will also keep bad smells or odours from your washing machine at bay. Now we just need to replace the front spring and again this is just a reversal of the removal making sure that its in the same place as where we took it off from otherwise it might not sit correctly and could easily be pulled off when removing the clothes after a wash.For free technical support on washing machines please use our washing machine and washer dryer forum where engineers will assist you if possible. Clamp bands can wear out, lose tension, or suffer damage over time, leading to a compromised seal between the door and the drum. Like most these days Beko can also have multiple variants under the one model number making the need for the production number or serial number absolutely essential in some cases to identify the correct spare parts. Model numbers usually consist of a manner of letters and numbers, and may also include characters such as a slash (/) or a dash (-). If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.