3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

spray is the best solution against warping by providing a great adhesion used filaments such as PLA, ABS, PETG and more materials. Success in 3D printing often relies on having the right tools and knowledge, and this starter pack will provide just that. Specially designed for FDM 3D printing and high demands, 3DLac has a very strong adhesion to 100-110 °C. Even a light mist applied over the 3D printer bed surface is enough to hold the first layer of plastic to the base completely. Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing.

When our filament users asked what we recommend for bed adhesion, we would always suggest this product. is constantly investigating how to improve the formula of the product to achieve greater adhesion to the base, hence the formula currently used is an improved version compared to the first. The special formula of the 3DLac Stick facilitates the removal of the part but it should be done very carefully nonetheless. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place.Depending on the materials will be obtained different adhesions, so we advise before printing large parts with certain technical materials are pre-tested. Depending on the 3D printed material, the effect may vary, which is why it is highly recommended to test the 3DLac Stick with certain materials ( ABS, PP, Nylon or advanced polymers) before 3D printing the final part. After the printing, wait until the heated base is below 30 °C, the adhesion will be lighter and without tools (depending on the characteristics and dimensions of the part) may remove the piece gently and without damage.

Leveraging 3DLAC’s extensive decade-long expertise in developing anti-warping solutions, 3DNYLON gains valuable insights and experience. All users who prefer use lacquer and not Kapton Tape, can be achieved with a sprayed or vaporized light on the glass bed base that the first plastic layer is fixed completely to this base bed. This facilitates application, allows for control over the amount of adhesive used, and a more precise and even distribution of the product on the printing base. This feature ensures even distribution, reduces excess adhesive, and ultimately enhances print quality, making it an ideal choice for 3D printing users.Depending on each material, different adherences will be achieved, so we advise you to do previous tests before printing with certain technical materials.

There are many reasons for adhesion problems, also depending on the filament used, and as many solutions, from adjusting the bed and ambient temperatures, choosing certain slicing software settings, or using tapes and special build surfaces to applying sprays (such as 3DLac Spray) or adhesion liquids, such as the 3DLac Stick.I received it yesterday 01/07/2020, I am having difficulty printing, 3dlac, I have already spent half a glass of 3dlac, waiting to work, if anyone knows of a good glue to print on 3d printer, I will be very happy. This stick adhesive is easy to use and creates a strong bond between the build plate and the 3D printed part, reducing the risk of warping. The 3DLac Stick adhesive dries quickly, lasts very long and is compatible with multiple materials and 3D printing surfaces.

If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. One where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. You can read all about the cookies we use, how they work and how you can adjust your preferences in our Cookie Policy.

A product capable of fixing what was needed in each part of the printing process and which meets our conditions was essential. ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. The product should be spread in a thin and uniform layer and allowed to dry before the 3D printing process is initiated. When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch.