Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

UltraCare Fuga Fresca is a ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of cementitious grout joints between tiles.

White, 103 Moon White, 110 Manhattan 2000, 111 Silver Grey, 112 Medium Grey, 113 Cement Grey, 114 Anthracite, 119 London Grey, 120 Black, 123 Ancient White, 125 Castle Grey, 127 Arctic Grey, 130 Jasmine, 131 Vanilla, 132 Beige 2000, 133 Sand, 134 Silk, 135 Golden Dust, 136 Mud, 137 Caribbean, 138 Almond, 141 Caramel, 142 Brown, 143 Terracotta, 144 Chocolate, 145 Terra di Siena, 149 Volcano Sand, 150 Yellow, 152 Liquorice, 163 Light Lilac, 167 Avio, 168 Cerulean, 169 Steel Blue, 170 Crocus Blue*, 172 Space Blue, 174 Tornado, 176 Green-Grey, 177 Sage, 187 Linen, 188 Biscuit, 189 Spelt.

Suitable for interior and exterior wall and floor grouting of ceramic tiles, porcelain, terracotta, stone material, glass and marble mosaics – not suitable for soft glazed tiles.

These deliveries take place on large 18-tonne trucks with tail lift capabilities and are strictly kerbside deliveries. Excellent workability, highly improved compared with traditional epoxy mortars thanks to its creamy consistency, which guarantees faster application times and makes it easier to clean the surfaces, with less waste and easier to obtain a good finish. UltraCare Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean. Added DropEffect Technology has also been used to create a water repellent grout which is easy to maintain, even in areas with resting water such as bathrooms.

Grouting of surfaces where a high protection against the formation and proliferation of micro-organisms is required.

With its beautiful silver grey colouring, it’s a stylish choice for both interior and exterior walls and floors, and a breeze to apply and clean. Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethane-based products. The driver will NOT be able to assist in getting the tiles into your property due to insurance purposes. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.

Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. If the goods are not in a re-saleable condition when they arrive back with us, Tiles-Direct reserve the right to amend the amount of the refund based on the value of re-saleable goods. Grouting industrial floor tile finishes (galvanizing plants, tanneries, battery rooms, paper works, etc. Not only is it mould-resistant and water-repellent, ensuring your surfaces stay hygienic and healthy, but it also boasts anti-efflorescence properties for uniform colour.