Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

The probe signals via audio and LED visual indicators to help with noisy environments, whilst the simple thumbwheel aids selection of the desired toning mode.

IntelliTone Pro’s SmartTone analogue toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.Toning - IntelliTone makes it easy to quickly locate the cable in the equipment closet when performing moves, adds and changes. With traditional analog toners and probes, isolating individual wire pairs precisely can be almost impossible because of signal bleed between pairs.

Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks. If the wall jack is obstructed but connected, the patch cable can be disconnected at the phone, and the male plug, be it 4, 6 or 8 position can be connected directly to the toner female jack. The presence of Ethernet indicates the connection is active and best located on the patch cables from the patch panel to the switch. Get advanced SuperVision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles.To achieve this, IntelliTone uses radio frequencies and a digital tone packet that drives all 4 pairs with a variety of toning methods. IntelliTone Pro 200 LAN Toner and Probe Kit Includes: IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ 45 patch cables, test leads with alligator clips, lanyards, quick start guide, and (2) 9-volt batteries. This kit features eliminates confusion over cable location and decisively rejects noise and false signals, locates the correct cable bundle, isolates cable within bundle, despite cable bleed, verifies twisted-pair installation with visual end-to-end continuity test (opens, shorts and reversed pairs), identifies individual wire pairs with new SmartTone™ analogue toning, simplifies signal interpretation in noisy environments with multiple LED indicators. The IntelliTone™ Pro LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles.

When the pair under test is not terminated, the copper conductors can be touched together briefly to cause a short. In the office, the wall plate jack may be 6 or 8-postion, with the 6-position jack having 4 or 6 pins. SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations. These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.Verify Ethernet Service - Is the link pulse correct, reversed due to a swap cable of the uplink port, or MDIX capable?