Inspired IPA Solvent Cleaning Fluid

Product Information

TLV is stated on the SDS of chemical products, in additional to recommended personal protection equipment (or PPE). Antiseptic: Isopropanol alcohol is used as an antiseptic to clean and disinfect minor cuts, burns, and scrapes.

Made in Britain brings together the British manufacturing community, united with the use of the registered collective mark. IPA – Isopropyl Alcohol is a highly effective, general use cleaning solvent that is used to clean a variety of substrates and remove a variety of soils. Panel wipe, also known sometimes as panel prep, is traditionally a solution made up of distilled water and Isopropyl Alcohol. This quick evaporation helps to prevent any moisture damage that might occur if a slower-drying liquid were used. This product is an alternative to harsh IPA cleaners, with a non-abrasive formula that primes paintwork, leaving a perfectly clean surface.Isopropyl alcohol can also be used as a solvent based cleaner for cleaning electrical components due to its ability to quickly evaporate.

Yes, the hole in the center of the cap is designed to work with commonly available 2” threaded spigots / spouts. Once applied to the floor space, the cleaning product leaves behind no residue unlike other products that can be used such as methylated spirits or petrol based cleaners. IPA (Isoproponal Alchohol) is a very effective cleaner of glass, PVC, ABS and perspex, stencils, etc. Whether you own a low traffic commercial premises, or a high traffic industrial plant with a heavily contaminated floor, our product will effectively and efficiently clean the surface of most contaminants to ensure the best possible bond once the our anti slip products are installed.Isopropyl alcohol is effective in removing most types of ink, but certain specialty inks, such as UV-cured inks or certain pigment inks, may require specific cleaning solutions or methods. The solvents used in degreasers do a great job at breaking down greases and oils, which also happen to exist in health skin. Using a 99% alcohol content on paintwork is a too strong a solution of IPA can stain and even soften some clear coat paints, which is why this is pre-diluted and ready to use safely. Let it Work: Allow the surface to remain wet for at least 30 seconds before wiping dry or leaving to air dry.