FISKARS 91095935 Bypass Pruner 731645

Product Information

The blades come with a low-friction coating that will help make the cutting effortless. It also helps keep the sap away from the blades and protect them from gumming up. You also don’t have to worry about rust getting to the blades for a long time. Pruning can be tiring work, especially to your hands and wrists. To offset that, many brands have pruners that are designed specifically to reduce the effort needed to squeeze the pruner blades closed and then reopen them. Notably, The Gardener’s Friend Ratchet Pruning Shears are specifically designed to be easy to use, even for those with sore or weak hands. Springs that help to reopen the blades are common, but some pruners take it further with ratcheting mechanisms that help decrease the force required to squeeze the blades together.

The Best Bypass Pruners (Review) in 2023 - Garden Gate

While cutting make sure to put the wood as deep into the blades as possible. This will give you good leverage to cut the wood as well as increase the life of the blades. But which bypass pruner is the best for your needs? Let’s take a look at some of them and help you make a good buying decision. Most bypass pruners will come with some rubber cushioning on the handles so that using them feels comfortable. When a branch is cut with an anvil cutter, it will not have a smooth cut end. As the branch is cut, it is crushed between the blade and anvil, resulting in a rough edge. The most important factor of a bypass pruner is the blade quality. It should be able to cut wood without bending, rusting, or losing sharpness fast.The Bahco Ergo bypass pruner is also a bit expensive when you compare it with some of the other options available. As a gardener, there are some tools that become an indispensable part of your gardening life. Something that you’ll always find in your bag of gardening tools or holster. Some bypass pruners come with rotating handles that help you cut wood with more ease. You do need to try them for some cutting because they need some getting used to. Strong Spring Anvil pruners have a flat blade that closes against an anvil made of hardened steel, while bypass pruners have sharp blades that cut as they pass each other and open up again to form their own spring-like shape.

Fiskars SmartFit Pruner Bypass P68 | Robert Dyas

Suppose that the flower stem was pruned with your average, run-of-the-mill pair of shears. This would result in a stem that was roughly cut, as the stem would have collapsed under the weight of the shears. Due to the rough cut, it can be difficult for water to pass through the stem. Alternatively, using a bypass pruner will result in a cleaner cut, allowing the stem to absorb as much water as it possibly can, essentially extending the flower’s lifespan before it inevitably wilts away. Tips for Using a Bypass Pruner Cut gently

The Top Bypass Pruner: A Buying Guide

We asked Brian Feldman, Sr. Director of Technical Operations at TruGreen, about the best time to prune plants. He said, "Timing is a very important consideration. Plant knowledge and identification is required before establishing the proper time to prune. If timing is wrong, flowering and fruiting can be sacrificed." Anvil pruners can be used to cut branches that are too large for standard pruning shears to handle. If you want to cut a lot of dead stems and limbs, it’s best to work with an anvil pruner. What is a Bypass Pruner Used For? These pruners have a pulley mechanism that greatly reduces the amount of force you need to exert to cut through branches, making them a good choice if you have a weak grip or painful hands. The maximum cut capacity is 3/4-inch so these can handle most common pruning tasks. They are a good size for the average hand but might be a bit large if your hands are very small. These are very reasonably priced anvil pruners, but note that a few customers complained that they broke while in use. Still, the majority of buyers were pleased with the pruners and felt that they performed well. The cutting action of anvils is similar to that of knives and they are best suited for deadheading flowers, while bypass pruners are similar to a pair of scissors and are designed for cutting live woody stems and branches.

Pruner vs. Bypass Pruner – What’s the Difference? Anvil Pruner vs. Bypass Pruner – What’s the Difference?

If there is sap or rust collected on the blades you’ll need to clean them up. You can unscrew the nut and bolt attaching the blades to the handle. Then clean up the blades using orange oil, vinegar, or WD-40. The typical pruner is between six and eight inches in total length. For most people, any size within that range will be comfortable to use and hold. However, if your hands are particularly large, you’ll be more comfortable with a pruner at the upper end of that range or even beyond it, while those with especially small hands will prefer a pruner that’s towards the lower end of the range. The Felco 6 is designed for comfortable use by gardeners with small-to-medium-sized hands. If you’re going to use the bypass pruner for a lot of pruning in your garden then it’s good to get a lightweight one. Most bypass pruners are small due to their use of cutting smaller branches so you should not have many problems in finding one. The F2 has a steel blade for durability and aluminum handles for lightness of weight. We loved the ergonomic design, as well as the red, rubbery covers that provide a secure grip while adding a cushioning feel—no hand pain here even after a lengthy session in the garden. The pruners have a steel nut and bolt that allow for tiny adjustments of the blades to secure the exact angle that works best for you. There's even a small groove on the edge of the pruners for snipping landscaping wire or similar materials so you don't damage the blade with such activities.An anvil pruner has a cutting blade and an anvil blade. The cutting blade pinches the branch on to the anvil blade. Such a pruner can cut wood with ease but they don’t give as clean a cut as a bypass pruner. So an anvil pruner is useful to trim dead wood in your garden. Do you need a bypass pruner?

Bypass Pruner - The Range

It’s important that the blades don’t move around when you’re not using the bypass pruner. This will help prevent cutting yourself or some other objects accidentally.

Comparing the Leading Bypass Pruners of 2023

Bypass pruners have two blades that move past one another to make a clean cut on your branches. They do not crush or pinch the branch-like anvil pruners do. Many models of pruners have a spring in between their handles that push the blades apart as you relax your grip which lessens hand fatigue and your workload. Pruners that don’t have a spring work more like a pair of scissors which relies on your hands to pull apart the handles with each cut. This bypass pruner weighs about 13.6 ounces which is a bit heavier than the pruners we have seen. But it is lightweight and you should have no problems using it for long cutting sessions. It seems to be hard to find replacement parts for this bypass pruner in case you need them in the future if something breaks.