Canon PIXMA MG3650 Multifunction Inkjet Printer - Black

Product Information

Colour document copy speed is measured based on average of sFCOT and sESAT in Performance Test of ISO/IEC 29183 standard. When the [Connection via Cableless setup] screen appears, hold down the printer’s [Wi-Fi] button (A) until the orange alarm lamp (B) flashes 2 times, then release after the second flash.

To test the image permanence of prints that are stored in an album, we use an accelerated testing method similar to how the image permanence of silver-halide photo papers are measured when stored in dark places. Print samples are printed with the optical density of 1.0 (each Bk, C, M,Y). The samples are kept in a certain environment of high temperature and 50% humidity. The rate of the decrease in the optical density and rate of yellow discoloration are recorded. The recorded results are then converted to the length of time when print image is kept in an environment of 23℃/ 50％ humidity. 'The point where monochromatic/ reflective optical density shows loss of 30% (starting density of 1.0). Power Consumption: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings. In Direct Connection mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. Mono Print Speed: A4 document print speed on plain paper is measured based on average of ESAT in Office Category Test of ISO/IEC 24734 standard.If you connect a device and the printer using Direct Connection, Internet connection may become unavailable depending on your environment. In that case, web services for the printer cannot be used. If your access point does not support the WPS feature, use the following instructions to set your printer up on your wireless network. To prevent automatic connection to the printer in Direct Connection mode , change the connection mode after using the printer, or set not to connect automatically in the Wi-Fi settings of the device. Declared yield value in accordance with ISO/IEC 24711 standard. Values obtained by continuous printing.

The following screen indicates the model of your printer and the name (or SSID) of your wireless network. When the printer has successfully made a connection to your wireless network, the power and Wi-Fi lamp will stop flashing and remain lit. Enjoy high quality performance, low cost prints and ultimate convenience with the PIXMA G series of refillable ink tank printers.

Detailed Features

When printing ISO/JIS-SCID N2 pattern on 10x15cm Photo Paper Plus Glossy II using default settings. Please note: A screen will be displayed asking you to select between a USB or wireless connection, please select [Wireless Connection]. Ink yield may vary depending on texts/photos printed, applications software used, print mode and type of paper used. For yield information see www.canon-europe.com/ink/yield

As for a device already connected to the printer without using a wireless router, reconnect it via a wireless router. The blue Wi-Fi lamp on the printer will continue to flash while searching, and the Power and Wi-Fi lamps will both flash when connecting to the access point. When the printer has successfully made a connection to your wireless network, the Power and Wi-Fi lamps will stop flashing and remain lit. Scan speed may vary depending on system configuration, interface, software, scan mode settings and document size etc. The connection between your device and the wireless router will be temporarily disabled while the setting is changed. Do not proceed to the next screen of this guide until setup is complete.Control all your printer functions with the Canon PRINT app or print direct with AirPrint (iOS) and Mopria (Android)