SSUPD Meshlicious Full Mesh Mini-ITX Gehäuse - schwarz

Product Information

Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Maintaining Meshlicious's minimalistic aesthetic, the I/O on top of the case is kept to the bare essentials. slot Zotac RTX 2080 Amp Extreme I used fit without adjusting the motherboard tray, but left little room between the side panel and the case fans. The temperature result for each section of the case is the highest value measured during the test run.

In a vertical orientation, there is sufficient clearance for a 4-slot full-length GPU (336 x 115mm (L x W)) allowing any I/O on the GPU to be accessible via an outlet port on the bottom of the case.AIO Chassis as the base of the machine, we are able to provide the ultimate in experiences never before seen in an All In One form factor. This configuration does mean there is no room for a radiator, but a 140mm fan can be installed in the front. To make the most of the volume and to keep it as low as possible, Ssupd has also included an angled HDMI cable to reduce the clearance needed beneath the case, while also allowing the graphics card to move up and down to further optimize its position.

Moving the motherboard tray back nearly an inch, as noted earlier, could alleviate this issue somewhat, but not if you’re using a graphics card that’s 3 slots or more thick. Would be nice to be able to move riser cable position so if you only have a 2 or 3 slot card you can increase the gap between the gpu and back of motherboard, improving cooling/air flow. As part of our RGB series of gaming PCs this unit comes with a fully controllable RGB lighting system which allows you to change the colour of your fans and LED strips with nearly infinite variations, all from the convenience of a remote control unit. Ssupd have gone out of their way to manufacture a case that allows for effortless hardware integration, such as exterior panels which can be effortlessly popped out with no need for tools. Not only does this avoid having to use right angle cables that may not even fit if your gpu heatsink is too large, but it also just makes the case feel more like a finished product.On the software side, the test setup includes Windows 10 Pro with Furmark and Prime95 both running at the same time to put the maximum load on both the processor and the graphics card. In a vertical orientation, there is sufficient clearance for a three-slot 315mm long GPU, allowing any I/O on the graphics card to be accessible via an outlet port on the bottom of the case. Uncompromised performance whilst you stream, chat and share with your community in stunning Ultra HD 4K HDR Premium Content. I tested several different layouts in the case, and removed and re-installed this cable a number of times with no ill effects to this point.

Additionally, when a GPU is mounted horizontally and an SFF PSU is fitted, a further bracket can be attached to the Meshlicious, which has space for two 3. If you look closely, you can see that ssupd allows you to move the GPU mounting brackets up or down by offering a total of three mounting holes, which means you have to move the position of the PCIe riser cable as well. Using this method and an SFX power supply there is enough of a gap between the PSU fan and side panel that the PSU would not be starved for air. The Meshlicious is the first PC case manufactured by Ssupd (Sunny Side Up Design), a new joint venture between Lian Li and NCASE. Every side save for the bottom has one, and by default, all are mesh except for one side which is tempered glass with a moderate tint.We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. Its meticulously designed mesh panels ensure optimal airflow and cater to high-end components, all presented in a contemporary vertical silhouette.