Cloudray Ruida RDLC320-A Co2 Laser DSP Controller for Laser Engraving and Cutting Machine

Product Information

Hard-spacing Protection: it is used for whether the hard-spacing protection of this axle is enabled. Smooth Motion Control: The Ruida controller’s advanced motion control algorithms ensure smooth and precise movements of the laser beam. This enables accurate positioning, intricate designs, and seamless curves in your laser projects. Next Origin: there are such five digits as 0~4 for option, which are the origins to be used for the next figure. Origin 0 means the origin set by the “Origin” key on the panel in the single- origin logic. 1~4 means the serial number of the origins in the multiple- origin logic. Next origin can be modified to any one of origin 1~4, so as to control the start location of next work (the premise is that the origin is enabled), but it can’t be modified to origin 0. parameters. If so, the setting will become ineffective and the system will automatically cover the parameters with the axis parameters.

Set Origin 1/2/3/4: after the multiple- origin logic is enabled, you can stop the cursor at “Set as Origin 1/2/3/4”. Press the “Enter” key on the keyboard and the system will take the coordinate figures of current X/Y axis as the corresponding ones to the origin 1/2/3/4. Multiple Origins Enable: “Yes” or “No” can be selected. If you select “No”, the system will use the single-origin logic. You can press the “Origin” key and set the origin, and only this origin can become valid. If you select “Yes”, the system will use the multiple- origin logic and the “Origin” key on the keyboard become invalid. In such a case, the parameter of each origin must be set in the menu as follows. The Pulse signal and the directional signal are all OC outputs. The Controller must be common anode with the motor driver Pulse and Test buttons work, but LightBurn does not - It's possible the Min Power is too low. Change the Power Min (%) setting in the layer to at least 10%, and make sure the Power Max (%) is 10% or higher, then run a test. Both the DRC6445S and DRC6445G support multiple communication protocols and are compatible with a range of laser cutting and engraving machines. The choice between the two would depend on the user’s specific requirements and the level of complexity they need in their laser control system. Size

RDC6442S/G 4-Axis Offline Laser Controller

Now, there are three ways that you can connect to the machine and get your programs from the computer into the brain. When the laser is a glass tube, if the used laser is outputted in the low-level form, this pin will be connected with the laser power enable end and used to control the ON/Off of laser.

The Ruida RDC6442S features a USB interface, which allows for easy transfer of data from a computer to the controller. It also has a dedicated DSP processor, which ensures that the laser head moves smoothly and accurately during the cutting and engraving process. Now, you’ll notice that beside that in-terminal, we’ve already got a five volt, but that’s a five volt output, not a five volt input. DSP (Digital Signal Processor) Technology: The DSP technology employed in the Ruida controller enables high-speed processing and precise control over laser parameters, resulting in exceptional cut quality and intricate engraving details. CN1 to CN4 are all to do with sensors and switches for telling the controller what’s going on around the machine. The Ruida RDC6445S is a newer version of the RDC6445G and is considered an upgrade. The RDC6445S is likely to have new or improved features and performance compared to the RDC6445G. AdvantageOpen the command prompt (type "cmd" in the start menu or in the Win + R search box). At the command prompt, type ipconfig, and press Enter. Your results will look similar to this: This function is to set the screen origin position, to choose different origin position, which can mirror the graphics on X/Y direction. The operation way as above mentioned. File Key Memory File Idle Move Speed: this parameter decides the highest speed of all non-lighting lines for the machine in the movement process.

Margin Distance: It means whether to extend a certain length outside the actual frame of the figure on the preview/cutting of frame. An occasional problem with new setups, and sometimes even existing machines, is lines cutting correctly, but engravings coming out slanted or skewed, like this:We’re not really going to bother with it too much, except to say that it is an alternating signal which is generated by the controller, Turning Speed: the turning speed at closed-angle corner, the lowest speed in the whole cutting process. Turning Acceleration: the acceleration speed at the closed-angle corner when cutting. If the two speeds are set too large, vibration will be happened when turning; if set too low, it will influence the cutting speed. Overall, it is important to choose a controller that offers a good balance between functionality and ease of use, and that will help you get the most out of your laser-cutting machine. Some users have reported stability issues and bugs with RDWorks, which can be frustrating to deal with.