SMOK RPM 2 Kit 80W 2000 mAh Built-in Battery 2mL (Prism Rainbow) Powerful, Versatile and Comfortable SMOK Vape POD E Cigarette Kit No Nicotine

Product Information

Disposables have become one of the most popular vapes for beginners. They offer an all in one device with no extras needed. Although the brand has made a number of disposable vape kits, the SOLUS range has become a great alternative, with simple to use refillable pods and an auto draw function.

The SMOK RPM 2 has a built-in battery, and you can charge it immediately after removing it from the box. If you have the SMOK RPM 2S, though, you’ll need to install an 18650 battery before charging the device. Remove the magnetic battery cap on the rear side of the device and insert the battery with the positive pole facing up. Replace the battery cap. Connect the device to your computer using the included USB-C cable. The device’s display indicates when the charging sequence is complete. How to Fill the SMOK RPM 2 Pod Yeah its a little taller, a little wider but apart from that its designed pretty much the same, so a lot of the following details will sound very familiar. Pod Housing is a decent capacity and you also have the bonus of opting for the external 18650 battery version if you prefer to swap batteries out. This may also extend the life of the device as you can just switch batteries when one goes bad. I’m not a fan of charge ports on the base as this means laying your device on its side, which can lead to leaking. Having the Device upright is always a better option. Smok RPM2 Aesthetics SMOK RPM 2 Mesh Coil:16 ohm, suggested power 25-50 watts. Designed to produce enormous clouds with rich, vivid flavours.The RPM2 kit comes with 2 pods, 2 coils, a USB-C port for charging and a massive 7ml capacity in Non-TPD format. When you start to detect a burned flavour or notice that your SMOK RPM 2 or RPM 2S no longer produces as much vapour as it once did, it’s time to replace the atomizer coil. When your pod is empty, remove it from the SMOK RPM 2 and flip it upside down. You’ll see the cylindrical atomizer coil on the bottom of the pod. Grasp the coil by its base and wiggle gently until it comes free. Push a replacement pod firmly into the hole before refilling and replacing the pod. How to Vape With the SMOK RPM 2

If you would like higher nicotine strengths but a smooth throat hit, the salt nicotines have taken the UK by storm in recent years. These typivcally have higher 20mg nicotine strengths, with a great range of delicious flavours and brands to choose from. The 0.6ohm RDL coils are the best choice for using salts. If you’d like to know approximately how many more puffs your SMOK RPM 2 will produce before it’s time to recharge the battery, press the fire and “+” buttons simultaneously.

Of course if you’re purchasing this device within the TPD regions, you will probably notice the pod has a large bung inside, which we can only hope is easily removable. Its larger than the original RPM40 but that doesn’t mean its lost its portability as its still a fairly small device. The 0.16 Ohm RPM 2 coil features a mesh build that can heat more e-liquid at a faster rate, this delivers better flavour along with increased vapour production. They can be used between 25 - 50W. If you’re looking for less vapour, the 0.6 Ohm RPM 2 coils will be a better choice as they support MTL vaping. It has smoothed edges and is fairly lightweight. The fire button is ideal for thumb firing as your pinkie nestles nicely at the base, but having said that, finger firing is OK too. Is your SMOK RPM 2 or RPM 2S not working properly? We have the help you need. In this section of our SMOK RPM 2 instruction manual, we’ll provide the steps that you should take to resolve the problems you’re most likely to experience with this device. SMOK RPM 2 Not Charging

SMOK RPM Mesh Coil: 40 ohm, suggested power 25 watts. Produces large, cool clouds with subtle, refined flavours. Before using your SMOK RPM 2 for the first time – or when replacing the atomizer coil – SMOK recommends filling the pod and allowing it to rest for at least 15 minutes before vaping. How to Replace the SMOK RPM 2 Coil Also make sure you Give it 5 or 10 minutes though to allow your vape juice to soak into the coil. Smok RPM2 Display & Functions Its a shame because the flavour is quite good and the 0.4Ω Mesh coil would also be a battery saver, so its a bit of a shame. Smok RPM2 AirflowLike the RPM40, the mouthpiece is the same, which is fairly comfortable, if not a little large for some. But I’ve got no real gripes with this style mouthpiece. Over the years, SMOK has produced some of the best-selling kits around. The Alien range offered vapers powerful performance with a cutting edge design, whilst the PRIV range provided a more cost effective way to quit smoking and start vaping. There are also the very popular Nord products, which gave people that same high performance in a smaller vape pod kit.