Joined in 2023 
82 
63 About this deal
The case of the GT3 models have easy grip rubber orange sides. The corners are rounded and the overall form factor feels very comfortable in the hand. The volume knob has a rubberized ring that makes it very easy to turn. Power Amplifier IC: Low crossover distortion, Low quiescent circuit current. Provides plenty of clean, clear receive audio. Also, please perform a search through all open and closed issues. Maybe someone else had the same problem before, and a solution is already available. Since the Baofeng RadioUV-5R series share the same manufacture programming software and CHIRP support most of Baofeng UV-5R models, this programming guidance is a helpful preference to the following model：
Baofeng Download– Radioddity Baofeng Download– Radioddity
This is a short review – the Baofeng GT-3TP from Sainsonic is essentially a GT-3 Mark II with some extra power on board. If you didn’t read that review, you might want to do so before continuing. It also comes with upgraded Antenna connector, Radio Frequency IC, FM Receiver Chip, Power Amplifier IC, etc.NOTE 1: Radios marked with an asterisk (*) were supported in the legacy builds of CHIRP, but have not yet been validated in CHIRP-next. See ChirpNextBuild for details. Please open a bug to report whether or not these work for you. New antenna: custom high gain Sainsonic INF-641, ultra flexible, better performance, longer range Spesifikasi Baofeng GT-3TP Mark III Frequency Range product_description": "Cette partie est utilisée pour la fiche du produit. Parlez aux clients de l'allure, du ressenti et du style de votre produit. Ajoutez des détails sur la couleur, les matériaux utilisés, le dimensionnement, et où il a été fabriqué.",
Baofeng GT-3TP | Berkualitas| Distributor Baofeng Indonesia| Baofeng GT-3TP | Berkualitas| Distributor Baofeng Indonesia
success_moderated": "Your comment was posted successfully. We will publish it in a little while, as our blog is moderated.",
Baofeng programming software
Big buttons & knob: GT-3TP has built in PTT key, CALL key, and MONI key on the left side of the radio
BaoFeng GT-3TP Mark III 8w Radio • My Off Road Radio BaoFeng GT-3TP Mark III 8w Radio • My Off Road Radio
High Power: Maximize the 8W output power of the Baofeng GT-3TP handheld ham radio to get extended range and increased clarity during transmission. Another low and mid-range power is available to help extend battery life. If you are a vendor and want to have your radio supported by CHIRP, please see InformationForVendors As for use, the radio has a terrible front end and received interference like crazy. I had the local NOAA station as Channel 0 and the local Skywarn repeater (146.880) set as Channel 1. It wasn’t uncommon for me to receive on both Channel 0 and 1 at the same time, even though only one was selected and the second VFO was set to Channel 3. This would be a terrible radio for fox hunting or radio direction finding. If this is your main use, I would pass.
Mobile CPS Software:
It also comes with an upgraded Antenna connector, Radio Frequency IC, FM Receiver Chip, Power Amplifier IC, etc.
Baofeng GT-3TP – KD9NRT – Adam Baofeng GT-3TP – KD9NRT – Adam
no_content": "This section doesn’t currently include any content. Add content to this section using the sidebar." The BaoFeng GT-3TP is a dual band two-way radio. It supports the following frequency ranges: 65-108 MHz for receiving FM radio, VHF 136 – 174 MHz, UHF 400 -520. It supports up to 128 memory channels. This is what everyone likes about these radios: more power. A standard UV-5R or GT-3 will deliver around 4 Watts on VHF and 3 Watts on UHF. Note: those few extra Watts won’t help you much if you want to extend your range. Range depends for 99% on other factors, such as terrain and antenna height. The battery will drain much faster though. The car charger is actually 10 volts rather than the typical 12 volts. The charging cradle of the GT-3TP is specifically designed to take a maximum of 10 volts. It’s actually a nice gesture on behalf of Baofeng to keep the parts consistent. The annoying bit is that you still need to connect the car charger to the charging cradle rather than directly into the radio for car charging.
If your problem is about how to use CHIRP with an already supported radio, then you should ask that question in the mailing list.
Great Deal 
New Comment