Joined in 2023 
82 
63 About this deal
If you only need the ability to record simple loops and you’re happy to control the loop with one footswitch (or connect an external footswitch for more control), then the RC-1 will be perfectly fine for those needs. New targets for external foot control, ideal for musicians who play guitar, keyboards, and other instruments If you want to record separate loops for your verse and chorus and switch between them as you perform, the RC-10R is better suited to do that. The best feature of the RC-1, in my opinion, is the indicator ring. This gives you a great visual indication of the length of your loop and what the looper is currently doing. The RC-30 also has inbuilt effects, which can be fun for a while, but most guitarists aren’t likely to use them. The main benefits to the RC-30 is the ability to save up to 99 loops and the control you have over every aspect of the loop. Choosing between the RC-3 and the RC-30
There are a couple of other pedals in the BOSS Loop Station range such as the RC-505MKII, but those pedals aren’t relevant for guitarists. They’re tabletop units designed for vocalists/DJs and don’t use footswitches. Find out how global superstar Ariana Grande uses the BOSS RC-505 in her new Vevo video series and learn about her looping history. Read more… Loop Station Capturing Your Creativity Get a looper that you’re not going to outgrow in the next few years. As an example, while the Ditto looper was incredibly popular when it came out, it’s incredibly basic. A lot of guitarists enjoy using it for a while, then start noticing it’s limitations. Two XLR mic inputs with phantom power, two stereo line input pairs, and three stereo line output pairs
The way to think about this is you can build a dedicated loop for different parts of a song, different instruments, or different layers you want to start and stop without interrupting the rest of the music. This is the story of a modern art form, from the trailblazers of the NY beat battles to the BOSS RC-505mkII Loop Station. Explore beatboxing. Read more… Looping Positions: Ariana Grande and the BOSS RC-505 Hopefully, this guide covered enough for you to make an informed decision on whether any of these loop stations are right for you. Extra Looper Pedal Resources If you’re a live performer and you think you’ll experiment with adding loops to your playing, the RC-3 is a great starting point. The big change with this pedal and the main selling point is how you manage the loops and settings. The graphic RGB LED screen gives you far more information than the segment displays on the other pedals.
If you feel split between the features across these two options, look at the prices of secondhand RC-3 pedals to see whether the extra features in the RC-5 is worth the extra cost. The big advantage the RC-300 still has over the RC-500 is the sheer number of footswitches, controls, and external device support. BOSS has a large range of guitar effects that could draw from, so hopefully, we will see a good range of guitar-based effects. The press release for the RC-600 mentions a lot of vocal and DJ-style effects, but I would expect to see a decent number of guitar effects as well. BOSS RC-600 vs RC-300 Comparison The first thing to point out is that the RC-3 was released in 2011, so it is nine years older than the RC-5.
The optional FS-7 makes footswitching even simpler and easier! And, its compact size won’t take up much space on your pedal board. Pressing the “A” switch will stop the Rec/Overdub/Play mode. Hold down the “A” switch for two seconds or longer to erase the phrase. By pressing the “B” switch, you can easily undo or redo your phrase. It’s that easy! Specifications Nominal Input Level -20 dBu Input Impedance 1 M ohm Nominal Output Level -20 dBu Output Impedance 1 k ohm Recommended Load Impedance 10 k ohms or greater Maximum Recording Time Approximately 12 minutes Controls Pedal switch
If you’re a live performer looking for a solid range of features, the choice is tough between the RC-5 and other units such as the RC-10R, RC-30, or RC-500. BOSS RC-3 vs RC-5The RC-600 is the most feature-filled loop station covered in this guide. It surpasses the now-ancient RC-300 in many ways as well as introducing new features not found on any other loop station pedal. When writing with the RC-505, the possibilities are virtually endless. Learn how to wield the Loop Station to supercharge your songcraft. Read more… The Definitive Guide to Tabletop Loopers For example, let’s say you have a delay pedal and you want the timing of the delay to match your loops. If your delay pedal is MIDI compatible, you can easily sync it with the RC-300 (the RC-30 also supports MIDI). Choosing between the RC-30 and the RC-300
When you use this driver version, the RC-300 system program MUST be updated to the latest version (Ver.1.03 or later).
Stereo inputs and outputs: All BOSS Loop Stations support mono or stereo inputs and outputs. This is great if you run a stereo rig, but it can be a great way to experiment with looping different instruments together. It doesn’t matter if you’re a beginner or a concert touring professional. The RC-1 is a great choice for any guitarist, bassist or keyboardist concerned with usability and simplicity while having lots of fun! What are some applications for the RC-1?
Great Deal 
New Comment