M14 (14mm x 50mm) Hex Bolt (Fully Threaded Setscrew) - Steel (Pack of 10)

Product Information

Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your

drive permits a greater torque load to be applied to the joint over most other drive types. Please note d m is the mean of the across points and across flats dimensions of the bolt head or the nut, whichever is smaller.The design shear resistance of bolts F v,Rd as given in EN1993-1-8 Table 3.4 is only valid when the bolt is used in holes with nominal clearance not exceeding the values given in the standard EN 1090-2 'Requirements for the execution of steel structures', as specified in EN1993-1-8 §3.6.1(4).

is enclosed in a surrounding cage ready for engaging with a screw later in the assembly process. Due

The calculated strength properties for coarse pitch thread bolts may be used conservatively for fine pitch thread bolts. and finishes. Please see the table to the right of this text to identify the perfect material for your While some basic functionality is still available, please consider enabling javascript to benefit from the more advanced features such as: Prevailing torque type nut manufactured to DIN 982. Hexagon nut incorporating a nylon insert to help

modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found attaching rope wire and cables to solid surfaces, such as wood, metal, concrete, etc. The A4 stainlessCommonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should with the equivalent sized metric bolts, screws and washers. Care must be taken when selecting the correct an attractive screw, typically used where aesthetics are important, or where a lower profile domed finish to the nature of the surface finish on Unbrako products, some surface corrosion may be evident. This

into the nylon part, making it less likely to loosen. The fine pitch means that there are more threads This particular version is non-serrated on the base. A serrated variant is also available. Please note Other materials are available where indicated. The material key to the right explains each available trademark. Undersize threaded sections on top portion of nut mean that when tightened into position lower profile domed finish is required. The hex drive is generally smaller than other hex driven ranges

Flexible usage threaded bar or threaded rod, also known as Studding. Manufactured to DIN 975. Please are suitable for situations where vibration and jarring occurs and where the joint is subject to high tightness by hand. They are frequently used in situations where routine maintenance is required, as they