About this deal
Thin layer mortar or slurry coating lining for internal water-proofing damp-proofing of basement and cellar walls and floors Sika Damp-proofing Slurry does not provide a trafficable finish on floors it will need to be protected with a levelling screed. Sika Damp Proofing Slurry will not bond to surfaces that have been treated previously with a water repellent. Use wet spray equipment to apply the first and second coats of Sika® Damp Proofing Slurry ensuring the first coat has hardened sufficiently to prevent damage from the second spray application. Smooth second coat using brush or trowel.
Apply Sika® Damp Proofing Slurry in even layers using a flat fibre brush on vertical surfaces and a rubber squeegee or brush for horizontal surfaces and allow to stiffen (2-6 hours). Apply a second coat of Sika® Damp Proofing Slurry as soon as the first coat has hardened and within 24 hours at the same coverage rate. Apply the first layer of Sika® Damp Proofing Slurry using a tooth trowel. Once the first coat has hardened, use a smooth edged trowel to apply the second coat. Special attention is required to avoid puncturing the waterproof coating with fixings, these should be accommodated either by surface bondingSika Damp-proofing Slurry is a ready to use just add water, water proofing brushable or trowelable membrane. Waterproof coating for tanking residential domestic and commercial premises basements and areas with damp issues.