3M VHB 4611 Double Sided Adhesive Tape - Designed to create durable and reliable bonds - 19 mm x 3 m, Thickness 1.1 mm, Grey & 5952F Double Sided Adhesive Tape - 19mm x 3m, Thickness 1.1mm, Black

Product Information

With this information, the adhesive and surface treatment can be selected based on technical data sheets, experience and the literature. If it is important, adhesive samples should be made and tested before the adhesives are used. In mechanical testing, the bonded joint is loaded until it breaks. The type of fracture provides information about the quality of the bond and indicates where defects occurred during bonding. An adhesion fracture is when the adhesive detaches from the joined part. A cohesion fracture is a fracture in the adhesive itself and a fracture in the part to be joined describes a fracture outside the adhesive surface in the part to be joined. Silicones - chemically more precisely known as poly(organo)siloxanes or siloxane - are synthetic polymers whose silicon atoms are connected via oxygen atoms (Si-O-Si). They occupy an intermediate position between organic and inorganic compounds. At present well over 10,000 different types of silicone are known. Silicone rubbers are differentiated according to the temperature required for cross-linking.

Adhesive Tapes are used in many sectors of industry on account of their excellent performance. They offer the unique advantage of economical, fast and clean processing compared with other mounting systems – both manual and automated. To ensure that the performance potential of our adhesive tapes is fully utilised, please follow the processing instructions listed below:The cold-crosslinking HTV silicone rubbers are plastically deformable materials which are used, for example, as cable sheathing, for electrical insulation or for sealing and damping purposes.

It has unparralelled long term and short term strength and boasts brilliant resistance to humidity, solvents , plasticisers and UV, salt water and alkalines. This tape withstands the test of time and weathering! POM - Polyoxymethylene is one of the most frequently used engineering plastics due to its excellent sliding and wear behaviour. With its outstanding mechanical properties, POM bridges the gap to the more expensive metallic materials, often replaces them and is therefore one of the preferred construction materials, e.g. for precision mechanical parts. Normally, bonding is only possible after surface pre-treatment by flame treatment, etching with primer, corona or low-pressure plasma. Modern, high-performance adhesives, however, can do without this. Further information. The tape is typically applied during the body in white process. It is run through the automotive paint pre treatment process and then the e coat process. The tape expands and cures in the e coat cure oven to fill and seal small gaps. The tape forms a continuous barrier between similar and dissimilar materials, which minimizes electrical conductivity and helps prevent galvanic interactions. Mechanical pretreatment by brushing, grinding, sanding or sandblasting - this changes the roughness and the size of the surface area effective for the bond. At the same time, loosely adhering reaction products, polishing and sliding agents and stabilisers are removed. The term sponge rubber is mainly used to describe open-cell and elastic foams that have a closed, leak-proof outer skin. These are expanded by adding blowing gases made of natural rubber, chloroprene, acrylonitrile-butadiene rubber or similar synthetic rubbers and are classified as porous rubbers. During vulcanisation, the blowing agent inflates the compound and gives the thermoplastic elastomer permanent elasticity. Sponge rubber is generally considered to have poor to hardly any adhesion. Depending on the second material, only individual, special adhesives are available that enable usable bonding. Adhesions of sponge rubber to certain plastics such as polyolefins (polyethylene, polypropylene) or rubber are particularly critical. Further information.VHB™ Tape permanently adheres one substrate to another and spreads the stress load across the entire length of the joint Our tape offering includes reflective tapes, silicone tape, standard masking tapes, and heavy duty masking tapes that are more resistant to weight and weather. Epoxy glues