Joined in 2023 
82 
63 About this deal
You can just replace the damaged spring as well instead of replacing the whole starter assembly. But it can be difficult to find the right-sized spring and installing the spring into the starter assembly can be extremely difficult. If the assembly is broken you can find a new starter assembly here. The engine has seized
Wind the new cord around the assembly in the same direction as the old cord. Make sure to wind the cord tightly and evenly around the assembly. Step 4. Reattach the Starter Cover
With the starter cord assembly removed, inspect the pull cord to see if there is a knot or if the cord is tangled onto itself or if it may have come off the reel on which it is supposed to wrap around when the pull cord retracts. You can use a screwdriver to help you in untangling a badly tangled pull rope. If you notice strands coming off the pull rope, then it is a sign that the pull rope is damaged and needs replacing because the strands can get caught inside the starter mechanism and make it difficult to pull the rope. If you have to replace the damaged pull cord ( you can find pull cords here) you can do that using the following method: If this happens, it can be difficult to free the chainsaw from the cord.If you notice that the pull cord is starting to become worn or if the chain has become tangled, it is important to replace the cord as soon as possible. This will help to ensure that your chainsaw remains operable and safe. Where to buy the stihl ms 180c pull cord replacement? Cord Not Retracting: If the cord does not retract when you release it, it may be due to a damaged spring or cord, and both may need Stihl hs45 pull cord replacement . Next, lift the rotor pulley from the housing and flip it over. You will find the recoil spring here. Now, if you do this carefully, the spring should stay coiled inside the pulley. At least, this is what you are aiming for. Recoiling the spring is a real pain. Remove the Recoil Spring
Reattach the spring to the assembly. This is usually done by hooking one end of the spring onto a small metal tab on the assembly and then winding the other end of the spring around the assembly.
more about start systems
It will be obvious if there is a problem with the spring, as it will either be tangled inside the housing or it will have bent hooks at either end. The spring can rust together in really bad cases, and you’ll probably have to replace it. How to Fix a Pull Start That Won’t Retract (Do This)
One really important step in how to fix a pull start that won’t retract is setting the correct tension on the cord. If it’s too loose, then the cord won’t retract, and if it’s too tight, you could end up damaging the spring. Therefore getting the tension just right is super important.
Find the correct size pull cord for your Stihl ms 180c saw. The pull cord size is marked on the saw frame. The mechanism of the pull cord on a lawn mower is not complex at all. And the reason that your cord is not catching is that any component of its flywheel starter assembly is damaged or failed under the high stress of daily use. Normally, it’s either broken or worn pawls or a defective pulley system. 5) Do you need an electrician to change a pull cord? Overall, substituting the pull cord on your Stihl Hedge Trimmer can improve your equipment’s functionality. It’s a small but significant repair that can make a big difference in the performance of your hedge trimmer. Next, use your nut driver to remove the center bolt holding the metal/plastic disc in place. Then, lift off the disc and remove the two pawls. You can set these parts aside for later. Remove the Rotor Pulley
To fix it, remove the recoil starter from your lawn mower and give the cord a couple of pulls if there is enough cord on the pulley, or try turning the pulley by hand. Broken Recoil Spring
The pull cord on a Stihl Hedge Trimmer can wear out over time, and there are several signs that indicate it needs to be replaced. Here are a few signs that it’s time to replace the pull cord on your Stihl Hedge Trimmer: Finally, test the new pull cord by gently pulling it a few times. If the cord retracts smoothly and the machine starts up, then you have successfully replaced the pull cord on your Stihl Hedge Trimmer. Over time, the pull cord can become worn or broken. If this happens, it may be difficult to operate the chainsaw. If you notice that the pull cord on your Stihl MS 180c chainsaw is worn or broken, you should replace it as soon as possible. The first place to look for a replacement pull cord is at your local hardware store. They will likely carry a variety of different brands and styles of replacement cords, so it is important to find the right one for your mower. Which is the best Stihl ms180c pull cord replacement? Here are a few key reasons highlighting the importance of pull cord replacement: Improved Functionality:
Great Deal 
New Comment