T Cut Color Fast Scratch Remover, Black, 150 g

Product Information

Step 3: Rub the T-Cut over the scratch with a steady and firm hand, ensuring you move the cloth in a circular motion. Do not be alarmed if your clothes change colour, as it is only due to the top layer of paint coming off.

Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips. Each product has its own instructions, which are worth reading carefully before starting. Generally though, you need to wash your car, or at least the area of repair, thoroughly. You also need to ensure you’re applying car treatments in the shade. Whether it’s wax, polish or scratch remover, standing out in the midday sun will inhibit the product’s ability to function properly. The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces:

A small amount of T-Cut should be able to remove spray paint from your car paintwork. As with all applications, it needs to be applied very carefully to ensure that further damage is not attributed to the care whilst removing the spray paint. Which T-Cut to use? Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear. It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe? Like treating ageing facial skin, you wouldn’t expect a high-street store’s best moisturiser to do the same job, or produce the same results, as an injectable deeper dermal filler. How do I fix deep scratches on my car? Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine.

On the other hand, if you’ve just marked your mum’s brand new motor or you’re returning a lease car and need to deal with a couple of scuffs to avoid penalty charges, you might be more motivated to attempt a repair. How do I apply car scratch remover? The time taken will depend on whether you repair by hand or use a machine. You don’t need to buy a specific car polishing machine. If you have a domestic drill, you can buy polishing attachments to help keep the costs of repair low. If you’re doing a manual repair, you’ll want to invest in some waffle applicator pads and a microfibre cloth. Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date.It’s worth stating now that if you’re seeing flashes of metalwork, you’ll probably need a scratch/chip repair kit. These have a three-step process to replace the primer, repaint the colour and add the clear top coat. Once you’ve followed these steps, a surface scratch remover or car polish will help even out your clear coat application. Do car scratch removers really work?