Cable Matters (1/8 Inch) 3.5mm to XLR Cable 1.8 m Male to Male (XLR to 3.5mm Cable, XLR to 3.5mm Jack, XLR to 1/8 Cable, 1/8 to XLR Cable)

Product Information

Fortunately, because XLR is designed to transmit balanced audio signals, it is not susceptible to these external noises and electromagnetic interference. Thus, an XLR can be used for long cable-run applications without facing any problems. That is why XLR cables are mostly used in professional audio and video settings and environments. Because XLR cables are balanced, they can be lengthened for more than 25 feet without being susceptible to external noise and electromagnetic interference.

All cables with an XLR connector are known to be balanced cables. This is because they primarily carry balanced audio signals. Any audio cable designed to be balanced can eliminate external noise and interferences that may try to affect the purity of the audio signal it is carrying. Therefore, when 3.5mm connectors and their cables are used for long cable run applications, the quality of the audio output may degrade. Due to this, most professional videographers do not like using microphones that come with 3.5mm connectors for their work. Due to this, whenever an XLR connector is being mentioned, it is the 3-pin XLR connector that is being referred to. Thus, a typical XLR connector is a 3-pin connector that is used in the audio and visual industries. This 3-pin connector is usually used to connect microphones and some musical equipment. Thus, cables with 3.5mm connectors are susceptible to being accidentally pulled out from the audio equipment they are connected to. Build Quality Another difference between XLR and 3.5mm connectors lies in their build quality. In general, most XLR connectors are made from relatively high-quality materials. Due to this, they do not get damaged easily. Thus, XLR connectors tend to last longer than 3.5mm connectors.Even though 3.5mm connectors, in general, are primarily meant for transmitting musical sounds, the 3.5 TRRS male connectors have been designed to have microphone functionality. A 3.5mm to XLR adapter is a cable that is built to have a 3.5mm TRS plug at one end and two male XLR connectors at the other end. There are many different 3.5mm to XLR adapters available. Over the years, 3.5mm connectors have gathered a bad reputation as being cheaply built. This is not surprising since most 3.5mm connectors are made from inferior materials. Thus the pins of 3.5mm connectors tend to break easily. Which is Better: XLR or 3.5mm? Unfortunately, the same cannot be said about 3.5mm connectors and the cables they come with. This is because 3.5mm connector cables are largely unbalanced cables.

Due to this, it can transmit voice signals when you speak through them. Thus, this particular 3.5mm connector is normally used in conjunction with smartphones. Difference Between XLR and 3.5mm Balanced/Unbalanced Due to this, the audio signal they transmit in such situations tends to be of poor quality. This is the main reason why XLR comes up top over 3.5mm. As you may already know, long cable runs are usually susceptible to external noise and interference. XLR is one of the popular audio connectors you will come across in the audio industry. The term XLR is an abbreviation for “External Line Return”. An XLR connector may have three or more pins. However, the XLR connector primarily used is the one with the 3-pin connector. Generally, an XLR connector refers to a 3-pin connector that is used in the audio and visual industries. This 3-pin connector is usually used to connect microphones and some musical equipment.

Xlr To Jacks

You can find 3.5mm ports on other audio devices such as mixing consoles, DACs, audio interfaces, integrated amps, and receivers. Thus, this audio equipment also allows you to connect headphones with 3.5mm connectors to them. It is also used in some stage lighting equipment. This is some brief information on what an XLR is. If you are interested in learning more about XLR, you should read this article titled “ XLR vs ¼ Inch”. What is A 3.5mm Connector? This is because all XLRs are balanced audio cables that carry balanced audio signals. Audio signals that are transmitted by balanced cables are not subject to electromagnetic interference and noise. Thus, the audio output transmitted by XLR cables is typically clean. The 3.5mm TRRS male connector is a four-conductor version of the 3.5mm connector. Thus, the TRRS in its name represents the four conductors or sections of the connector. Even though the TRS male connector can transmit balanced mono signals, the stereo signals it transmits are unbalanced. Unbalanced cables cannot withstand electromagnetic interference and noise, especially when they are used for long cable runs.

What this means is that cables with XLR can preserve the cleanliness of audio signal output. They cancel out noise that may find its way into an audio signal. Thus, an output signal from an XLR cable is the same as it was when it was transmitted from its source. The 3.5mm TRRS connector is primarily used for headphones with a built-in microphone. You probably know the headphones used by gamers and Twitch streamers that have a microphone attached to them. Most use a 3.5mm TRRS male connector, if not all of them. XLR connectors are better than 3.5mm connectors. Cables with XLR connectors deliver audio of much better quality than cables with 3.5mm connectors.

Sale

Because the cables that come with XLR connectors are basically noise-canceling, many prefer them over 3.5mm cables. Also, the three pins of XLR connectors provide a much better and more reliable connection than that of the 3.5mm connector. Thus, connections involving XLR connectors tend to be more solid than a 3.5mm connector connection. Can You Connect XLR to 3.5mm? Yes, you can connect an XLR to a 3.5mm. You can connect a device with an XLR port to another device that accepts a 3.5mm connector. This can be done by using a 3.5mm to XLR adapter.

This adapter is normally used to connect 3.5mm TRS microphones to professional recording equipment that has female XLR ports.