JSP Force®8 Half-Mask with PressToCheck™ P3 Dust Filters, Size Medium, Conforms & Complies with safety standards EN 140 / EN 143, Suitable for: Construction, DIY, Water based Paint Spraying

Product Information

Fit It: Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit. The JSP Force Mask has been designed with comfort in mind, which is why the ultra lightweight harness structure cradles the head. The mask is designed to be lightweight so that you can use the mask over an extended period of time without developing fatigue. As a result, it is one of the lightest face masks on the market. How Safe Is the JSP Force 8 Face Mask?

Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made. Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made. Features & benefits Conforms to EN 140 (Face piece), EN 14387:2004 (Filter performance), EN 143:200 (Filter performance) Respirator components, especially exhalation valve and seat, should be inspected prior to each use. A respirator with any damaged or deteriorated components should be discarded

JSP Force 8 Typhoon Half Mask With PressToCheck P3 Filters

Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit. Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit. PRESS IT! Reflective strips create increased visibility in low-light environments for added safety. Typhoon™ Exhalation Valve Face-fit - Respiratory protection is only effective if it is correctly selected, fitted and worn throughout the

The above table is for guideline purposes only. Before commencing work, you MUST conduct a proper risk assessment and fit test. Do not use for respiratory protection against atmospheric contaminants which have poor warning properties, are unknown or immediately dangerous to life and health or against chemicals which generate high heats of reaction with chemical filters This mask system is cross-compatible with much of the JSP PPE range, allowing you to wear face shields, ear defenders, goggles, and helmets simultaneously.

Where Can I Use the JSP Force 8 Respirator with PressToCheck P3 Filters?

The assembled respirator may not provide a satisfactory face seal with certain physical characteristics (such as beards or large side burns) resulting in leakage between the facepiece and the face, the under assumes all risks of bodily injury which may possibly result Clean the facepiece (excluding filters) using a cloth moistened with a weak detergent solution and allow to air dry in a noncontainated atmosphere